Home > RV Parts & Hardware > Door Hardware >

Camco 42330 RV Screen Door Crossbar Handle with Motion-Activated LED, Adjustable 21-5/8" to 28-5/8"

Camco 42330 RV screen door crossbar handle with motion-activated LED light, adjustable aluminum bar with UV-stabilized resin brackets
Camco RV Screen Door Crossbar Handle with Motion-Activated LED, Adjustable 21-5/8" to 28-5/8"
 
Alternative Views:


List Price: $44.29
: $33.99
You save $10.30!
Part Number: 42330
Manufacturer: Camco

Quantity in Stock :32

Availability: In Stock
Qty:

 
Camco Motion-Activated LED Adjustable 21-5/8" to 28-5/8" Camco 42330 RV Screen Door Crossbar Handle with Motion-Activated LED

Stop replacing torn screens and fumbling in the dark. The Camco 42330 is a 2-in-1 aluminum crossbar that physically protects your RV screen from push-through damage while a built-in motion-activated LED automatically illuminates your entryway steps after dark -- no wiring, no switches, no guesswork.

One Bar Solves Two Common RV Problems

RV screen doors take a beating. Guests, kids, and pets push through them rather than using the handle, and one hard push can split a screen from top to bottom. At the same time, RV steps and entryways go dark the moment the porch light is off, making late-night returns a tripping hazard.

The Camco 42330 crossbar mounts horizontally across the interior face of the screen door, giving everyone a visible, solid grip point that keeps hands away from the screen mesh. The integrated motion sensor detects movement and triggers the LED automatically, lighting the steps for several seconds before shutting off to preserve battery life.

Adjustable Span

Telescoping aluminum bar adjusts from 21-5/8" to 28-5/8" to fit most standard RV screen door widths without cutting.

Motion-Activated LED

Passive IR sensor triggers the LED automatically when motion is detected at the entry -- no manual switch needed.

UV-Stabilized Brackets

End brackets are molded from UV-stabilized resin so they resist fading, brittleness, and cracking under prolonged sun exposure.

Screen Protection

Crossbar position gives occupants and guests a natural grab point, keeping pressure off the mesh and eliminating the #1 cause of screen tears.

Installation Overview

The crossbar mounts to the door frame or door edge using the included hardware and UV-stabilized resin end brackets. The aluminum tube slides inside itself to hit your exact door width, then locks in place. No cutting, no drilling into the screen frame is required on most standard RV doors. The LED unit typically takes two AAA or AA batteries (batteries not included -- see battery spec table).

What Is Included

  • Telescoping aluminum crossbar (adjusts 21-5/8" to 28-5/8")
  • 2 UV-stabilized resin end brackets with mounting hardware
  • Integrated motion-activated LED light unit (mounted to bar)
  • Mounting screws

What Is NOT Included

  • Batteries (LED unit requires batteries -- see specs for type)
  • Replacement screen mesh
  • Door latch hardware

Typical RV Fitment

The 21-5/8" to 28-5/8" adjustment range covers most standard RV entry screen doors found on Class A, Class C, fifth wheels, and travel trailers. Measure your door's interior horizontal span at the intended crossbar height before ordering. Very narrow doors (under 21-5/8") or wide commercial-style doors (over 28-5/8") are outside the rated adjustment range.

Maintenance Tips

  • Wipe aluminum bar and brackets with a damp cloth seasonally to remove road grime and salt deposits.
  • Replace LED batteries at the start of each camping season for reliable motion-activation all year.
  • Check bracket screws for tightness after the first few trips -- vibration can work them slightly loose.
  • If LED response slows, check battery contacts for corrosion, especially after storage in humid conditions.

Related Accessories to Consider

  • Camco RV screen door replacement mesh -- for doors already torn before this bar is installed
  • RV step lights and porch lights for additional exterior illumination
  • Door handle hardware sets for complete entry door refresh

Product Identification

ManufacturerCamco
Part Number42330
Vendor Part #09-9063
UPC014717423304

Crossbar Specifications

Adjustment Range21-5/8" to 28-5/8" (telescoping)
Bar MaterialAluminum
Bracket MaterialUV-stabilized resin
MountingInterior face of screen door frame, horizontal
Hardware IncludedYes -- mounting screws included

LED Light Specifications

Light TypeLED, integrated into crossbar
ActivationPassive IR motion sensor (automatic)
Battery TypeAAA batteries (batteries not included)
Light DurationActivates on motion, auto-off after delay
Wiring RequiredNo -- battery powered only

Compatibility

Door TypeStandard RV screen/storm entry doors
Compatible RV TypesClass A, Class C motorhomes, fifth wheels, travel trailers with standard-width entry doors
Door Width RangeFits openings 21-5/8" to 28-5/8" wide
Doors NOT CoveredDoors narrower than 21-5/8" or wider than 28-5/8"

Package Contents

Crossbar1 telescoping aluminum bar with integrated LED
End Brackets2 UV-stabilized resin brackets
HardwareMounting screws
BatteriesNot included

Important Information

  • Measure your screen door's interior horizontal span before ordering -- the bar adjusts from 21-5/8" to 28-5/8" only. Doors outside this range will not be properly covered.
  • Batteries are NOT included. Install fresh batteries before first use to ensure the motion-activated LED functions on arrival at your campsite.
  • This crossbar is a protective handle and light -- it is not a door latch, door lock, or security device.
  • Mount on the interior face of the screen door only. Do not use as a structural support or load-bearing handle for heavy items.
  • UV-stabilized resin resists sun damage but prolonged direct contact with harsh chemical cleaners may degrade the bracket finish over time -- use mild soap and water only.


Browse for more RV Accessories in the same category as this item:

RV Parts & Hardware > Door Hardware
RV Parts & Hardware


$58.80