Home > Fresh Water > Plumbing >

Camco 11691 RV Water Heater Tank Rinser with Shut-Off Valve -- 1/4 In ID Tip, Garden Hose Fitting

Camco 11691 RV Water Heater Tank Rinser with shut-off valve and 1/4-inch ID tip, connects to standard garden hose
Camco RV Water Heater Tank Rinser
 
Alternative Views:


List Price: $14.09
: $11.95
You save $2.14!
Part Number: 11691
Manufacturer: Camco

Quantity in Stock :31

Availability: In Stock
Qty:

 
CamcoPart 11691 / 09-02071-Year WarrantyCamco RV Water Heater Tank Rinser -- Flush Sediment, Extend Water Heater Life

Mineral deposits, sediment, and debris settle at the bottom of your RV water heater tank over time, reducing efficiency and shortening the life of the tank and heating element. The Camco 11691 Tank Rinser gives you a fast, low-effort way to flush that buildup out through the drain port using nothing more than a standard garden hose connection.

A Simple Tool That Pays for Itself in Heater Life

Most RV water heater tanks -- whether Atwood/Suburban 6-gallon or 10-gallon units -- accumulate calcium and lime scale, sediment, and anode rod debris with every fill. Skipping periodic flushing accelerates corrosion, reduces hot water output, and can void manufacturer warranties. The Camco 11691 makes flushing a 10-minute job instead of a messy ordeal.

The tool inserts directly into the water heater drain opening after you remove the drain plug or anode rod. Hook up a garden hose, open the shut-off valve, and the curved wand directs a pressurized spray around the interior of the tank -- loosening and flushing out sediment that gravity alone won't fully drain. When done, close the valve, disconnect the hose, and reinstall your drain plug or anode rod.

Garden Hose Ready

Connects directly to any standard male garden hose fitting -- no adapters needed for most campground spigots and RV hose reels.

Built-In Shut-Off Valve

Included shut-off valve lets you control water flow without walking back to the spigot, making one-person flushing straightforward.

Precision Rinse Tip

The 1/4 in ID, 3/8 in OD tip focuses water flow inside the tank, directing the spray at settled sediment on the tank floor and walls.

Lightweight and Compact

Weighs only 0.11 lbs. Fits easily in a tool bag or maintenance kit -- ready whenever you drain your tank at season changeover or between trips.

Who Should Use This Tool

This rinser is a practical addition to the maintenance kit of any RV owner running an onboard propane or electric water heater. It is especially useful for:

  • Full-timers and long-trip travelers filling from municipal water supplies with high mineral content
  • Anyone performing a seasonal flush or anode rod inspection/replacement
  • Owners noticing reduced hot water output or discolored water from the heater
  • Service techs performing routine RV water system maintenance
Extend Your Water Heater's Service Life

Flushing sediment once or twice per season -- or every 3 to 6 months for full-timers -- helps preserve the tank lining, protects the anode rod from premature depletion, and maintains heating efficiency. The Camco 11691 makes this task quick enough that there's no reason to skip it.

How to Use

  1. Turn off and allow the water heater to cool completely before servicing.
  2. Turn off the water supply to the RV and relieve pressure by opening a hot water faucet inside.
  3. Remove the drain plug or anode rod from the water heater drain port.
  4. Insert the Camco 11691 rinser wand into the drain opening.
  5. Connect a standard garden hose to the rinser's inlet fitting.
  6. Turn on the water supply and open the shut-off valve on the rinser.
  7. Move the wand as needed to direct the spray at sediment buildup.
  8. Allow water and sediment to flush freely from the tank opening.
  9. Close the shut-off valve, remove the hose and wand, and reinstall the drain plug or anode rod.
Maintenance Tip

Inspect and replace your water heater anode rod while the tank is drained -- it is the single most important step for preventing tank corrosion. Camco and other suppliers offer replacement magnesium anode rods compatible with Atwood and Suburban RV water heaters.

What's in the Box

One (1) Camco 11691 Tank Rinser wand with integrated shut-off valve and standard garden hose inlet fitting. No additional adapters are included or required for standard garden hose connections.

Product Specifications

ManufacturerCamco
Part Number11691
SKU / MPN09-0207
UPC014717116916
Weight0.11 lbs
MaterialHigh-quality plastic construction
WarrantyLimited 1-Year Manufacturer Warranty

Connection and Fitting Details

Inlet ConnectionStandard male garden hose fitting
Tip Inner Diameter1/4 in (ID)
Tip Outer Diameter3/8 in (OD)
Shut-Off ValveIncluded

Compatibility

Water Heater TypesPropane and electric RV water heaters with accessible drain port
Common Compatible BrandsAtwood, Suburban (standard drain port location)
Tank SizesSuitable for 6-gallon and 10-gallon RV water heater tanks
Hose RequirementStandard garden hose (not included)

Application Details

Primary UseFlushing sediment and mineral deposits from RV water heater tanks
Frequency of UseEvery 3-6 months, or at seasonal changeover
Water Supply RequiredStandard campground or residential garden hose pressure
Important Information
  • Always turn off the water heater and allow it to cool completely before draining or inserting any tool into the tank -- contact with hot water or steam can cause serious burns.
  • Relieve tank pressure by opening a hot water faucet inside the RV before removing the drain plug.
  • Do not use this tool with the water heater energized (burner on or electric element active).
  • Inspect the drain port threads before and after use -- do not force the wand into a damaged port.
  • Garden hose and drain plug/anode rod are NOT included.
  • This tool is designed for periodic maintenance flushing, not for continuous high-pressure use.


Browse for more RV Accessories in the same category as this item:

Fresh Water > Plumbing
Fresh Water
Camco