Direct-fit OE upgrade rear shock for 1994–2001 Ram 1500 2WD, 1994–2002 Ram 2500 2WD, and 1994–2002 Ram 3500 2WD at stock height. 46mm monotube design. Hardware included (lower spring mount only). Made in the USA.
The Bilstein 24-184854 B6 4600 Series Rear Shock Absorber is the 2WD rear upgrade for the second-generation Dodge Ram full lineup — covering the Ram 1500, Ram 2500, and Ram 3500 in rear-wheel drive from 1994 through 2001/2002. This is one of the most beloved Dodge truck generations, particularly among diesel Cummins owners running the Ram 2500 and 3500 in demanding tow and work applications.
At high mileages, worn rear shocks on these trucks show up as excessive rear bounce, instability under trailer loads, and the generally sloppy rear-end feel that degrades both ride quality and driver confidence. The 4600 series, precisely application-tuned for the second-gen Ram rear suspension, restores and improves all of that — better rear axle stability, more settled highway composure, and improved control under load.
One part covers Ram 1500, 2500, and 3500 2WD rear suspension across the second-generation platform
Fade-free rear damping under the demands of second-gen Ram trucks — consistent performance whether empty or loaded
The definitive rear shock upgrade for 2WD 12-valve and 24-valve Cummins Ram 2500/3500 work trucks
Designed, engineered, and manufactured in the USA. Backed by Bilstein's limited lifetime warranty
The 24-184854 is for 2WD (RWD) Ram models only. Four-wheel drive Ram 2500 and Ram 3500 use a different rear shock. For 4WD Ram 2500/3500 (1994–2002), order Bilstein 24-188036 instead. Verify your drivetrain before ordering.
Ram 1500 Ends in 2001: The Ram 1500 fitment ends at 2001, while the 2500 and 3500 continue through 2002. Verify your specific year and model before ordering. Hardware Note: Includes lower spring mount only. Your original factory rubber bushings and steel washers from the old shock must be saved and reused during installation — do not discard them before removal. Sold Individually: One shock absorber per package. Order qty 2 for a complete rear axle replacement. Stock Height Only: The B6 4600 Series is for stock-height applications only.
In The Box (Qty: 1 Shock Absorber): • Bilstein 24-184854 Rear Shock Absorber • Blue Protective Boot • Lower Spring Mount Hardware NOT Included / Reuse from Old Shock: • Upper rubber bushings (reuse OEM) • Steel washers (reuse OEM) • Second shock (sold individually — order qty 2 for a complete rear pair)
24-184847 — Front B6 4600 shock for 1994–2002 Ram 2500/3500 2WD (pairs with this rear shock for 2WD Ram 2500/3500) 24-188036 — Rear B6 4600 shock for 1994–2002 Ram 2500/3500 4WD For second-gen Ram 1500, pair with the appropriate 1994–2001 front shock. For Ram 2500/3500 2WD, pair this rear shock with 24-184847 for a complete stock-height upgrade.
Bilstein Official Product Page Bilstein Technical Support: Website: www.bilstein.com Warranty: Limited Lifetime for original purchaser — B6 4600 series gas pressure shocks. Proof of purchase required. See full terms at Bilstein's website.
The 24-184854 fits the following vehicles at stock ride height with 2WD (RWD) drivetrain. Note the Ram 1500 ends at 2001 while the 2500/3500 run through 2002. Sold individually — order two for a complete rear replacement.
⚠️ Fitment cross-referenced across Amazon, Shock Surplus, Jack-It, XDP, Geno's Garage, and Suspension Lifts. 2WD only — 4WD Ram 2500/3500 requires Bilstein 24-188036. Ram 1500 fitment ends 2001; 2500/3500 runs through 2002. Always verify your specific year, model, and drivetrain before ordering.