 |
 |
 |
|
The Viair P/N# 20002 Constant Duty Onboard Compressed Air System is designed with a 2.5-gallon air tank and 485C CE compressor. It has a working pressure of 200 PSI and a fill rate of 2.24 CFM.
- The Air tank features six 1/4" NPT ports for various configurations on your vehicle.
- Pressure switch with relay turns on the compressor at 110 PSI, and off at 145 PSI.
- Digital tire inflation gun with built-in 180 PSI gauge.
- Sealed pressure switch, 165 PSI on, 200 PSI off.
- 20 ft 12-gauge wire with inline fuse holder.
- 485C stealth black Viair compressor features automatic thermal overload protection.
- Dash panel gauge allows you to monitor the pressure of the air tank.
- Permanent, maintenance-free magnetic motor.
- Ready to use right out of the box.
- Max Working Pressure: 200 PSI / 2.24 CFM.
- Air Tank Size: 2.5 gallons.
- Duty Cycle: 100% @ 200 PSI.
- Voltage: 12V.
- Amperage: 23A.
- Ingress Protection Rating: IP67.
- Dimensions: 10.63" L x 4.1" W x 6.44" H.
- See additional photos for complete dimensions.
- Weight: 15 lbs.20002Includes (1) 2.5 gallon, 6 port Viair air tank, (1) 450C model Viair compressor, (1) 36 ft 1/4" air line (for accessory and gauge installation), (1) 30 ft coil hose, and all required hardware & fittings to install.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs. Viair 20002 Continuous Duty Onboard Compressed Air System - 200 PSI, 2.5 Gallon Tank
|
|
|
 |
|
 |
|
