Home > LP Gas > Propane Tanks >

AP Products 024-1001 Tank Check Propane Level Indicator
AP Products 024-1001 Propane Gas Level Indicator
AP Products 024-1001 Propane Tank Gas Level Indicator

Alternative Views:

Normally: $37.28
MFG P/N: 024-1001
MFG: AP Products
UPC #: 711217020797
Weight (lbs): 1

Quantity in Stock :22
Availability: In Stock
Product Code: 06-2191

DESCRIPTION Instructions
The AP Product 024-1001 Tank Check is a propane tank gas indicator that is easy to use and even easier to install. The magnetic sensor mounts to the bottom of the LP tank to indicate the level of propane left in the tank. The sensor is monitored by downloading the free Mopeka TankCheck app on your smartphone or tablet which connects via Bluetooth delivering an accurate tank level. The level is updated every 5 seconds when your device is within 150 feet of the sensor.
  • Sensor measures the liquid propane using active sonar technology
  • Magnetic sensors mounts to center/bottom of LP tank
  • Updates every 5 seconds
  • Use with 20, 30 & 40 lb propane tanks
  • Can work on larger tanks, but it will not start reading accurately till the level drops
  • Sensor battery life is 1 to 1-1/2 years and is easily replaceable
  • App monitors LP level, sensor battery life & signal strength for each sensor added
  • Can be installed on vertical & horizontally mounted tanks
  • Sensor communicates via bluetooth to smartphone or tablet
  • Free Mopeka App can monitor up to 15 different tanks on RV, BBQ, patio grill, pool heater, home lp tank etc.
  • App shows tank level using percentage.
  • Uses a disc battery #CR2032.
  • Includes (1) magnetic sensor and (3) propane tank feet
  • Limited 3 year manufacturer warranty
TIP: if tank is older or has some surface imperfections, use some Vasoline between the sensor and tank to remove any air/space gaps that would cause poor readings.

AP Products Tank Check Propane Level Indicator

Additional Product Information

The Mopeka TankCheck by AP Products is an easy way to monitor one or more propane tanks using your smart phone or tablet. The innovative sensor is installed to the center/bottom of a vertically or horizontally mounted propane tank of any size. When installing the sensor ensure the tank is clean and free of rust before attaching the sensor which features two extra strong magnets that hold it in place. If you will be installing it on smaller vertically mounted tanks you may have to use the included rubberized plastic tank feet to raise the tank up to clear the sensor.