Restore streak-free visibility on your Class A motorhome or large coach with this AP Products replacement wiper blade insert and rubber bulb combo. Designed specifically for the wide, high-clearance windshields found on full-size RV chassis, this 96-inch combo set replaces your worn wiper rubber without requiring a full arm assembly swap.
Factory wiper blades on Class A motorhomes take a beating -- they cover enormous windshield surface area, run in all weather, and are often ignored during routine maintenance until streaking, skipping, or chattering makes driving hazardous. AP Products 018-3014-96 is a direct-replacement insert and bulb combo engineered for the 2-1/2 inch wide wiper channel used on most full-size RV and coach wiper arms.
At 96 inches total length, this is a bulk/combo format intended for cutting to length or direct application on large-format wiper arm assemblies. The 31/32 inch channel profile locks into standard RV wiper blade carriers without modification. Both the insert (the rigid backing spine) and the bulb (the flexible wiping rubber) are included, so you get a complete renewal of the wiper element in one package.
Includes both the rigid wiper insert spine and the soft rubber wiper bulb -- everything needed for a full wiper element replacement.
Sized for the standard 31/32 inch wiper arm channel used on most Class A motorhome and coach wiper assemblies.
Wider 2-1/2 inch format provides greater windshield contact area and improved wipe coverage on large coach windshields.
Full 96-inch combo length accommodates large windshield spans or can be trimmed for precise fitment on your specific coach.
RV wiper blades on Class A and commercial-style coaches are typically constructed in layers. The outer arm assembly (the metal or plastic carrier with the pivot hardware) is bolted to the wiper motor drive. Inside that carrier sits the wiper insert -- a rigid backing element that distributes pressure evenly across the blade. Pressed into the insert is the wiper bulb -- the soft rubber strip that actually contacts and wipes the glass.
Over time, both the bulb and insert wear, deform, or crack. Replacing only the bulb sometimes leaves a warped insert behind that causes uneven pressure and streaking. The AP Products 018-3014-96 combo replaces both components together, restoring proper geometry and a fresh wiping edge at the same time.
This blade combo is designed for wiper arm carriers with a 31/32 inch channel opening and a 2-1/2 inch blade profile. These dimensions are standard on many full-size Class A motorhome wiper assemblies, including those found on Freightliner, Spartan, Workhorse, and similar chassis commonly used under Tiffin, Fleetwood, Monaco, Coachmen, Winnebago, Holiday Rambler, and other major coach brands.
Most RV wiper blades should be inspected at least once a year and replaced when any of the following are present:
AP Products is a well-established supplier of RV replacement parts and accessories, distributing through major aftermarket channels including NTP Stag. Their wiper blade inserts and bulb combos follow standard OEM channel dimensions, making them practical replacements across a wide range of coach brands without requiring specialty parts from the original chassis manufacturer. Part number 018-3014-96 is the 96-inch length in the 2-1/2 inch, 31/32 channel series.