Repair leaks, cracks, and small holes in compatible metal fuel tanks with the AP Products 002-90181 Fuel Tank Repair Kit. The complete epoxy-and-fiberglass system handles cracks up to 4" long and holes up to 3/8" in diameter without welding.
The AP Products 002-90181 Fuel Tank Repair Kit provides the materials needed to make a durable repair on a compatible metal fuel tank. The system combines a two-part repair resin with fiberglass reinforcement to seal damaged areas without requiring welding.
The included surface-preparation materials and application tools make it a convenient all-in-one repair kit. The resin begins to harden within approximately 8 to 10 minutes and cures in approximately 30 minutes under recommended conditions.
Designed specifically for repair of compatible metal fuel tanks
Suitable for slow-leaking cracks measuring up to 4" in length
Repairs compatible damaged areas with holes up to 3/8" in diameter
Epoxy-and-fiberglass repair system eliminates the need for welding
This repair system is intended for metal fuel tanks only and must not be used on plastic fuel tanks. Confirm the tank material before beginning the repair.
In The Package: • Two-Part Repair Epoxy • Fiberglass Cloth • Sandpaper • Application Brush • Mastic / Repair Putty
Work only in a well-ventilated area and follow all supplied safety and repair instructions. Vent the tank before repair and reduce the fuel level below the damaged area when required. Keep ignition sources, sparks, and open flames away from fuel and fuel vapors.