Pair of replacement spring bars rated for Blue Ox SwayPro weight distribution systems with a tongue weight between 1,500 and 2,000 lbs. Beveled ends lock into the head assembly with a spring pin, and the kit includes the lift chains and hardware needed for a complete swap.
The Blue Ox BXW4014 is a pair of replacement spring bars for your SwayPro weight distribution system, rated for tongue weights between 1,500 and 2,000 lbs. Because all Blue Ox SwayPro head assemblies are the same, these interchangeable spring bars let you adjust your system's weight capacity up or down without replacing the whole hitch.
The bars feature beveled ends that lock into place with a spring pin — no grease required — for cleaner use and easier storage. The kit includes everything needed for a complete spring bar swap, including lift chains and hardware.
Covers tongue weights from 1,500 lbs up to 2,000 lbs
Fits any Blue Ox SwayPro head assembly to change system capacity
Beveled ends lock in with a spring pin for cleaner handling
Includes spring bars, lift chains, and mounting hardware
Because Blue Ox SwayPro head assemblies are identical across capacity ratings, this 2,000 lb spring bar kit can be used to upgrade a lower-rated SwayPro system (such as a 1,000 lb or 1,500 lb kit) or serve as a direct replacement for an existing 2,000 lb setup. SKU: BXW4014 | Quantity: Pair (2 Spring Bars) | Rating: 2,000 lbs TW
Confirm your trailer's actual tongue weight falls within the 1,500–2,000 lb range before ordering. Using spring bars rated too far above or below your tongue weight can result in a harsh or unsafe ride — it's safer to be as close to your actual tongue weight as possible.
General Installation Steps: 1. Remove Old Spring Bars: Detach the current spring bars from the SwayPro head assembly 2. Insert New Spring Bars: Position the beveled ends into the head assembly 3. Secure with Spring Pin: Lock each bar into place using the spring pin 4. Attach Lift Chains: Connect the included chains to the trailer frame brackets 5. Adjust Tension: Set chain tension per your SwayPro's installation instructions
In The Box: • Two (2) Spring Bars • Lift Chains • Mounting Hardware