Replacement snap-up lever / lift handle for compatible Equal-i-zer and Fastway e2 weight distribution hitches. Provides extra leverage when lifting spring arms into place on trailer-frame sway-control brackets.
The Fastway 95-01-6000 Snap-Up Lever is a replacement lift handle used during weight distribution hitch hookup. It helps lift the spring arms into position on the trailer-frame brackets, making hitch setup easier and reducing the strain of manually raising the spring bars into place.
This snap-up lever is useful as a replacement for a missing, bent, worn, or damaged lever, or as an extra tool to keep in the tow vehicle or trailer storage compartment. It is commonly listed for use with Equal-i-zer and Fastway e2 weight distribution hitch systems.
Replacement lift handle for compatible Equal-i-zer and Fastway e2 weight distribution hitches
Helps lift spring arms into place on trailer-frame sway-control brackets
Designed to engage the spring arm and help raise it into position during hitch setup
Handy replacement or spare tool for keeping with the tow vehicle or trailer
This snap-up lever is intended for compatible Equal-i-zer and Fastway e2 weight distribution hitch systems. Always confirm the hitch style and bracket setup before use. Keep hands, feet, and body clear of the spring arm path while lifting or lowering spring arms. Spring arms are under load during hitch setup and removal.
Replace the snap-up lever if the original tool is missing, bent, cracked, heavily corroded, or no longer engages the spring arm securely. Missing tool: A replacement lever makes hitching easier when the original handle has been lost. Bent or damaged hook: Do not use a lever that cannot properly engage the spring arm. Damaged handle: Replace the lever if the handle is cracked, deformed, or unsafe to grip. Spare setup tool: Many owners keep an extra snap-up lever in the tow vehicle so hitch setup is not delayed if the original is misplaced.
1. Prepare the Hitch: Park on level ground and follow the hitch manufacturer's hookup procedure. 2. Position the Spring Arm: Move the spring arm toward the trailer-frame bracket according to the hitch instructions. 3. Use the Snap-Up Lever: Engage the lever with the spring arm and use the handle to lift the arm into place on the bracket. 4. Secure the Spring Arm: Install the proper retaining pin or clip for the hitch system before towing. 5. Check Both Sides: Confirm both spring arms and bracket assemblies are properly secured before travel. Always follow the weight distribution hitch owner’s manual. Spring arms may be under tension during setup and removal.
• (1) Snap-Up Lever / Lift Handle
Progress Mfg.: Fastway: fastwaytrailer.com/contact-us Equal-i-zer: equalizerhitch.com/contact Phone: 800-478-5578 Progress Mfg. manufactures both Fastway and Equal-i-zer towing products.