Pair of L-brackets with 8-inch frame mounts built for Blue Ox TrackPro and 2-Point weight distribution systems. These brackets clamp onto your trailer frame and hold the spring bars in place, adding a point of sway-controlling friction to your towing setup.
The Blue Ox BXW4080 is a pair of L-brackets with 8-inch frame mounts, designed for use with Blue Ox TrackPro and 2-Point weight distribution systems. These brackets clamp onto the trailer frame and hold the spring bars in position, giving your towing setup an additional point of steel-on-steel friction that helps control sway.
This kit is a straightforward way to replace worn or damaged L-brackets, or to set up a new TrackPro or 2-Point system that requires the 8" frame mount length.
Clamp-on brackets sized for an 8-inch trailer frame mount
Adds steel-on-steel friction points to help control trailer sway
Secures spring bars in place for consistent weight distribution
Includes both L-brackets needed for a complete replacement
Per Blue Ox's official listing, the BXW4080 frame mounts measure 8 inches, not 8 feet. This is a standard trailer-frame-mounted bracket sized in inches, consistent with other Blue Ox L-bracket kits in this product line.
Confirm your weight distribution system is a TrackPro or 2-Point system before ordering, as L-bracket designs vary between Blue Ox product lines. If your trailer has a coupler welded underneath the frame, you may need a longer L-bracket kit instead of this standard 8" version.
General Installation Steps: 1. Position on Frame: Locate the correct mounting position on the trailer frame 2. Clamp the Bracket: Secure the L-bracket frame mount onto the trailer frame 3. Tighten Hardware: Fasten all mounting bolts to spec 4. Repeat for Second Bracket: Install the matching bracket on the opposite side 5. Attach Spring Bars: Connect your spring bars to the newly installed brackets
In The Box: • Two (2) L-Brackets with 8" Frame Mounts