Replacement snap-up hook for Equal-i-zer 6,000 lb, 10,000 lb, 12,000 lb, and 14,000 lb weight distribution hitches. This is the hook portion used with the snap-up handle to help lift spring arms into position during hitching.
The Equal-i-zer 90-03-6100 Snap-Up Hook is a genuine replacement service part for 6K, 10K, 12K, and 14K Equal-i-zer weight distribution hitches. It is the hook portion of the snap-up tool used during hitching to help raise the spring arms into position on the trailer-mounted L-brackets.
This part is ideal when the original snap-up hook is missing, bent, damaged, worn, or separated from the handle. Because the snap-up hook and snap-up handle are listed as separate service parts in the Equal-i-zer parts breakdown, this item should be ordered when only the hook portion is needed. It does not include the snap-up handle, hitch head, spring arms, L-brackets, or pin hardware.
Factory replacement snap-up hook listed in the Equal-i-zer 6K–14K hitch parts breakdown
Replaces the hook section of the snap-up tool; snap-up handle and complete lever assembly are not included
Compatible with Equal-i-zer 6,000 lb, 10,000 lb, 12,000 lb, and 14,000 lb weight distribution hitches
Good replacement for a missing, bent, damaged, or worn snap-up hook used during hitch setup
This item includes the snap-up hook only. It does not include the snap-up handle, hitch head, shank, spring arms, trailer brackets, link plates, hitch ball, socket pins, snap L-pins, or other weight distribution hitch hardware. Compatibility note: Equal-i-zer lists 90-03-6100 as the snap-up hook for 6K, 10K, 12K, and 14K hitches. The 4K Equal-i-zer hitch uses a different snap-up hook, part number 90-03-6140. The 16K hitch parts breakdown lists the complete snap-up lever as 95-01-6050 instead of this hook-only part. Verify your hitch rating and manual before ordering.
Replace the snap-up hook if the original hook is missing, bent, cracked, heavily worn, or no longer engages the spring arm correctly during hitching. Missing Hook: If the hook portion has been lost, this replacement restores the working end of the snap-up tool. Bent or Damaged Hook: A distorted hook may slip, bind, or fail to lift the spring arm properly. Worn Contact Area: Heavy wear where the hook contacts the spring arm can reduce control and make hitching less secure. Incorrect Fit: If you have a 4K or 16K Equal-i-zer hitch, verify the correct snap-up tool part number before replacing this component.
Basic Use: 1. Confirm Hitch Rating: Verify that your Equal-i-zer hitch is a 6K, 10K, 12K, or 14K model before ordering or installing this hook 2. Inspect the Handle: Make sure the existing snap-up handle is still straight, usable, and compatible with the replacement hook 3. Attach Hook to Handle: Install or position the hook portion on the snap-up handle as required by the hitch manual 4. Use for Hitching: Engage the hook with the spring arm and use the handle for leverage to lift the arm into position on the L-bracket 5. Secure Spring Arm: Once the spring arm is seated on the L-bracket, install the proper Snap L-Pin to retain it before towing 6. Inspect Before Travel: Verify the spring arms, L-brackets, socket pins, clips, and snap L-pins are secure before towing Always follow the Equal-i-zer owner's manual for your specific hitch model. Do not tow with damaged, missing, modified, or improperly secured hitch components.
In The Package: • (1) Snap-Up Hook Not Included: • Snap-up handle • Complete snap-up lever assembly • Hitch head • Shank • Spring arms • L-brackets • Link plates • Hitch ball • Snap L-pins • Socket pins or clips
Equal-i-zer Hitch / Progress Mfg.: Website: equalizerhitch.com/contact-us Equal-i-zer is manufactured by Progress Mfg., the same company behind Equal-i-zer and Fastway towing products.
Use this guide to distinguish the 90-03-6100 snap-up hook from related Equal-i-zer snap-up tool parts.
Need the full tool instead of only the hook? Verify whether your hitch requires the snap-up handle, hook, or complete snap-up lever before ordering.