Replacement pair of locking pins built for older-style SwayPro weight distribution hitch heads. These pins hold the spring bar securely in place once it's installed into the head unit, keeping your towing connection locked in during use.
The Blue Ox BX88463 is a replacement pair of locking pins for older-style SwayPro weight distribution hitch heads. These pins are what hold the weight distribution spring bar securely in place once it's installed into the head unit, so a worn, bent, or lost pin can affect how securely your spring bars stay locked in during towing.
This is a straightforward, low-cost fix — rather than replacing the whole hitch head, you can swap in a fresh pair of locking pins to restore secure spring bar retention.
Holds the weight distribution spring bar in the head unit
Includes both locking pins needed for a complete replacement
Low-cost repair alternative to replacing the full hitch head
Manufactured to match original SwayPro hardware specs
This kit is designed for older-style SwayPro hitch heads. Blue Ox also sells a separate locking pin kit for newer head units, which explicitly will not fit pre-2012 heads and vice versa — confirm which style hitch head you have before ordering to make sure you get the correct pin kit. Do not operate or use this equipment until the Operation Manual and Installation Instructions have been read and understood.
General Installation Steps: 1. Remove Spring Bars: Detach the spring bars from the hitch head unit 2. Remove Old Pins: Take out the worn or damaged locking pins 3. Install New Pins: Insert the replacement locking pins into the head unit 4. Reinstall Spring Bars: Reattach the spring bars into the head unit 5. Test Function: Confirm the pins lock securely and hold the spring bars in place
In The Box: • Two (2) SwayPro Locking Pins