Replace broken, stripped, or corroded RV water heater door latches with these stainless steel thumb-turn cam locks. Sold as a 2-pack, they also work on RV propane bottle covers and other exterior access doors that use standard cam-style latches. Corrosion-resistant construction holds up to road vibration, weather, and repeated use.
A water heater door that won't stay closed -- or a latch that spins freely with no engagement -- is a common frustration on older rigs. Camco's 09214 cam locks drop into the same mounting footprint as the original hardware on most RV water heater access panels, letting you restore a secure, positive close without modifying the door or surround.
The thumb-turn operation requires no key and no tools to actuate in the field. The stainless steel construction resists the rust and white oxidation that plague zinc or mild-steel latches after a season or two of outdoor exposure.
Corrosion-resistant construction survives road spray, rain, and humidity without rusting or seizing.
No key required. Quick finger-operated turn locks and unlocks the cam from outside the compartment.
Two locks per package -- replace both water heater latches at once or keep one as a spare for another compartment.
Matches the standard mounting cutout used on many RV water heater access doors and propane bottle covers.
Camco 09214 cam locks are a direct replacement for the original thumb-turn cam latches found on a wide range of RV water heater access doors -- particularly those built into fiberglass or aluminum exterior panels. They also serve as replacements on:
If your existing latch has a round barrel that passes through the door panel and is secured from behind with a clip or nut, there is a good chance the 09214 matches your mounting hole.
Water heater and propane compartment doors face constant exposure to road grime, moisture, and cleaning agents. Stainless steel latches outlast zinc-alloy originals significantly, especially in coastal, wet-climate, or year-round full-time use applications.
Cam lock replacement is a simple DIY task on most RV panels:
No drilling or cutting is required when replacing a latch of the same barrel diameter. Verify the barrel diameter and panel thickness before ordering if your existing latch is non-standard.
These cam locks are also commonly used on LP propane cylinder compartment doors. If the door on your tank cover swings open unexpectedly or the original latch has stripped, the 09214 provides a simple replacement. Ensure the cam arm length is sufficient to engage your door's strike or frame edge.
Even stainless steel cam locks benefit from an occasional spray of silicone lubricant or dry PTFE lube on the barrel and cam pivot. This keeps the thumb-turn action smooth after seasons of outdoor exposure and prevents galling at the cam pivot point.