Magnesium replacement anode rod for compatible Suburban and Mor-Flo RV water heaters. Measures 9-1/2" long and helps protect the steel water heater tank by attracting corrosive elements in the water.
The Camco 11562 is a magnesium RV water heater anode rod designed for compatible Suburban and Mor-Flo water heaters. An anode rod is a sacrificial part that attracts corrosive elements in the water, helping protect the inside of the steel water heater tank from corrosion.
This 9-1/2" replacement rod is commonly used during routine RV water heater maintenance. It should be inspected regularly and replaced when substantially consumed, worn down, or no longer able to provide proper tank protection.
Sacrificial anode helps protect the tank from corrosion
Standard long anode rod size for compatible Suburban/Mor-Flo units
Designed for compatible Suburban and Mor-Flo RV water heaters
Replace when the rod is heavily worn or mostly consumed
This anode rod is for compatible Suburban and Mor-Flo RV water heaters. Do not choose an anode rod by RV make or model alone; confirm the brand and style of the water heater itself. If the water heater uses an aluminum tank, a different rod style or no anode rod may be required depending on the manufacturer.
Inspect the anode rod at least during regular water heater maintenance. Replace it when it is heavily eaten away or no longer has enough material left to protect the tank. Always turn off power and gas, allow the water to cool, relieve pressure, and drain the water heater before removing the old anode rod.
• One Camco 11562 magnesium anode rod • Packaging/components as supplied by manufacturer
Confirm your RV water heater is a compatible Suburban or Mor-Flo model that uses a 9-1/2" magnesium anode rod with 3/4"-14 NPT threads. Do not order by camper brand alone. The water heater brand and anode rod size are what matter.
Magnesium anode rods are commonly used for Suburban-style RV water heaters and provide sacrificial corrosion protection inside the tank. Aluminum rods are often chosen for different water conditions, such as very hard water, or where the water heater manufacturer recommends aluminum. Match the rod material to the water heater requirement and water conditions before ordering.
The Camco 11562 is a magnesium RV water heater anode rod for compatible Suburban and Mor-Flo water heaters. It measures 9-1/2" long with 3/4"-14 NPT threads, 5/8" rod diameter, no built-in drain, and UPC 014717115629. Verify water heater brand, rod length, thread size, rod material, drain style, tank type, and safe service requirements before ordering.