Brass 90-degree hose elbow for compatible RV fresh water inlets, campground spigots, outdoor faucets, and standard garden hose connections. Helps reduce hose kinking, hose strain, and stress on RV water intake fittings.
The Camco 22502 is a 90-degree brass hose elbow designed to connect between a standard water hose and a compatible RV fresh water inlet, outdoor faucet, or hose connection. The angled design helps route the hose downward or sideways to reduce bending and strain at the connection point.
This fitting is useful when a straight hose connection puts unnecessary pull on the RV city water inlet or causes the hose to kink. By changing the hose angle, the elbow can help improve hose routing and reduce stress on the fitting during normal fresh water hookup use.
Redirects hose angle to reduce bending and fitting strain
Durable brass fitting for RV and garden hose connections
Designed for compatible RV water hose and faucet hookups
Simple elbow fitting only; does not include an on/off valve
Thread the elbow onto the compatible RV water inlet, faucet, or hose connection, then attach the water hose to the opposite end. Hand-tighten first and check for leaks before applying water pressure. Use a good hose washer and avoid over-tightening, especially on plastic RV city water inlets.
The Camco 22502 is commonly used on RV city water inlets, campground water hookups, residential outdoor faucets, garden hose connections, and other compatible fresh water hose setups. It is especially useful where a straight hose connection creates strain, kinking, or awkward hose routing.
• One Camco 22502 90-degree brass hose elbow • Packaging/components as supplied by manufacturer
Confirm the connection uses standard garden hose-style threads and has enough clearance for a 90-degree elbow fitting. This is a basic angled fitting only. It does not include a shutoff valve, pressure regulator, filter, or check valve.
Hose connections can vary by thread condition, washer condition, inlet style, and available clearance. If the connection leaks after installation, inspect the hose washer, faucet threads, RV inlet threads, and mating surfaces before assuming the elbow is the issue.
The Camco 22502 is a brass 90-degree fresh water hose elbow for compatible RV fresh water inlets, campground spigots, outdoor faucets, and standard hose-style connections. It helps reduce hose kinking and strain on RV water intake fittings. This fitting does not include a shutoff valve. Verify thread style, hose routing, inlet clearance, washer condition, thread condition, regulator placement, and fresh water use before ordering.