Home > Jacks & Levelers > RV Levels >

Camco 25543 T-Level Two-Way RV Bubble Level, Screw Mount or Adhesive, 1.625 x 2.25 in

Camco 25543 T-Level two-way RV bubble level, screw mount or adhesive, compact 1.625 x 2.25 inch twin-tube design for motorhomes and travel trailers

Camco T-Level Two Way RV Level

Alternative Views:

List Price: $14.99

: $12.49

You save $2.50!

Part Number: 25543
Manufacturer: Camco

Quantity in Stock :25

Availability: In Stock

Qty:

Camco Two-Way Leveling Screw or Adhesive Mount Camco 25543 T-Level -- Two-Way RV Bubble Level

Get your rig perfectly level at every campsite without guesswork. The Camco T-Level reads front-to-back and side-to-side simultaneously in a single compact unit, so you know exactly which way to pull the jacks or stack the blocks before you unhitch.

Fast, Accurate Leveling for Any RV Setup

The Camco 25543 T-Level is a twin-tube bubble leveler that gives you two independent axes of level reading at a glance. Whether you are parking a Class A motorhome, backing in a fifth wheel, or positioning a pop-up camper on uneven ground, this small tool tells you immediately how far off-level you are and in which direction -- saving you from multiple pull-ups and re-parks.

Installation takes less than five minutes. Choose to drive two small screws through the molded mounting holes, or peel and press using the included adhesive backing. Mount it on a tongue, a frame rail, a slideout step housing, or any flat exterior surface that gives you a clear sightline from the driver seat or from the door.

Twin-Tube Design

Two bubble vials in a T-shaped body read X and Y axes simultaneously -- no rotating, no repositioning.

Compact Footprint

At 1.625 in wide x 2.25 in long x 0.56 in tall, it fits in tight spots on any frame, tongue, or step housing.

Dual Mounting Options

Screw mount through molded holes or use the included adhesive -- no drilling required if you choose the adhesive method.

Ultra Lightweight

Weighs only 0.06 lbs (about 1 oz). Adds virtually nothing to your rig and will not loosen fasteners over time from vibration weight.

Where to Mount Your T-Level

Placement is key to getting accurate readings quickly. Common mounting locations RV owners use include:

On the A-frame tongue of a travel trailer, near the coupler -- visible from outside while stacking leveling blocks
On a rear bumper or frame crossmember of a motorhome -- readable from the rear camera view or a spotter
Inside a basement compartment door frame -- level visible when the door is open during setup
On a slideout step housing -- a flat, accessible surface on most trailers and fifth wheels
Any exterior flat surface that stays in your line of sight during the leveling process

Faster Setup at Every Site: Mounting a permanent bubble level on your RV eliminates the need to carry a separate hand level or rely on a smartphone app. You see the reading the moment you stop -- before you ever lower a stabilizer.

Screw Mount vs. Adhesive Mount

Both methods are included in the package. The screw mount option is more permanent and recommended for high-vibration locations like a tongue or frame rail that see road shock. Use two small #6 or #8 screws (not included) through the pre-molded holes in the base.

The adhesive option works well on smooth, clean painted or powder-coated surfaces. Clean the surface with isopropyl alcohol before pressing the level in place, and allow the adhesive to cure before driving.

Tip: If you are mounting to an aluminum frame extrusion or a painted steel tongue, screw mounting provides a more secure and long-lasting bond in all weather conditions.

Maintenance Note: Bubble vials are sealed and require no maintenance. If the unit is surface-mounted with adhesive and begins to lift at the edges after prolonged UV exposure, clean and re-adhere with a weatherproof mounting tape or add a small screw through the existing holes.

Compatible RV Types

The T-Level is a universal fit for virtually any recreational vehicle, including:

Class A, Class B, and Class C motorhomes
Travel trailers (bumper-pull)
Fifth-wheel trailers
Toy haulers
Pop-up and folding campers
Truck campers with a flat mounting surface
Boat trailers and utility trailers where leveling is needed

Physical Specifications

Part Number	25543 (CMC25543)
SKU	14-8462
UPC	14717255431
Manufacturer	Camco
Width	1.625 in
Length	2.25 in
Height	0.56 in
Weight	0.06 lbs (approx. 1 oz)

Leveling Features

Level Type	Twin-tube bubble (vial) level
Axes Measured	Front-to-back and side-to-side simultaneously
Body Shape	T-configuration housing
Vial Count	2 independent bubble vials

Mounting Options

Primary Mount	Screw mount through molded base holes
Alternate Mount	Adhesive -- included with unit
Screws Included	No -- use #6 or #8 screws (customer supplied)
Surface Requirement	Flat, reasonably smooth surface

Package Contents

Included	1x Camco T-Level with adhesive backing
Sold As	Individually (single unit)
Screws	Not included

Warranty and Compliance

Warranty	Limited 90-Day Manufacturer Warranty
Brand Origin	Camco Manufacturing -- RV accessory specialist

Important Information

This level indicates RV tilt direction and approximate off-level angle -- it is a guide tool, not a precision instrument. Use in combination with your RV manufacturer's recommended leveling procedure.
Mounting screws are NOT included. If screw-mounting, use appropriately sized fasteners for your substrate (steel, aluminum, or wood).
Adhesive mounting on dirty, wet, or oily surfaces will fail. Clean thoroughly with isopropyl alcohol and allow to dry completely before adhering.
Do not mount on a flexible or frequently flexed surface -- bubble reading will be inaccurate if the mounting base is not rigid.
Sold individually -- one T-Level per package. Most RV owners install one on the tongue/front and optionally a second at the rear; order multiple units if needed.
90-day limited warranty covers manufacturing defects only. Physical damage or improper installation is not covered.

Browse for more RV Accessories in the same category as this item:

Jacks & Levelers > RV Levels
Jacks & Levelers