Stop wrestling with incompatible fittings at the dump station. The Camco 39551 Easy Slip Sewer Kit ships fully assembled and covers four different campground sewer inlet sizes with a single 4-in-1 bayonet elbow adapter -- so you pull in, connect, and dump without hunting for adapters at the bottom of a storage bin.
The 39551 kit pairs a 10-foot HTS (High-Tensile Strength) sewer hose with Camco's Easy Slip 4-in-1 bayonet straight elbow adapter. The hose connects directly to your RV's 3-inch bayonet sewer outlet, and the elbow adapter drops into the ground inlet at the dump station. Because the adapter handles four different inlet sizes, you are not stuck if the campground hookup is non-standard.
The compact elbow adapter is sized to slip inside a standard 4-inch square RV bumper, keeping your sewer kit out of sight and protected from road debris when you are traveling. No separate storage tube needed.
One adapter fits four common campground sewer inlet sizes via Easy Slip bayonet connection. No tools, no separate fittings to carry.
High-tensile-strength construction handles the weight of waste flow without kinking or collapsing. Reaches most standard campground pedestal placements.
Adapter and hose sized to store inside a standard 4-inch square RV rear bumper -- no separate hose carrier required.
Hose and elbow adapter arrive pre-connected. Unbox, attach to your rig's bayonet outlet, and you are ready to dump at your first stop.
The sewer hose uses Camco's standard bayonet-style fittings, which are compatible with the 3-inch bayonet sewer outlet found on the vast majority of Class A, Class C, and fifth-wheel rigs, as well as most travel trailers built in the last two decades. The rotating swivel collar on the bayonet end makes it easy to lock onto the coach outlet without twisting the hose.
The 4-in-1 elbow adapter is specifically designed to handle the range of sewer inlet sizes you encounter at public and private campgrounds across North America. If you travel full-time or move between campgrounds frequently, this single adapter eliminates the need to carry a collection of separate reducer fittings.
Most Class A, Class C, and many fifth-wheel coaches come with a hollow 4-inch square rear bumper designed for hose storage. The Camco Easy Slip elbow and the coiled 10ft HTS hose are dimensioned to fit inside that bumper cavity without any modification. If your rig has a different storage solution -- a dedicated hose tube, a basement bay, or an external hose carrier -- the kit works just as well stored there.
The 10-foot hose reaches the sewer inlet at most standard pull-through and back-in campsites. For sites with an unusually distant sewer connection, or if you park with your coach outlet away from the pedestal side, you may want to add a Camco sewer hose extension (sold separately) to bridge the gap.
Camco backs this kit with a limited 90-day manufacturer warranty against defects in materials and workmanship.