A simple, durable adapter that angles your sewer hose connection 45 degrees off the drain valve -- reducing hose strain and letting you see exactly what is flowing during tank dumps and flushes.
When your RV drain valve faces straight down or at an awkward angle relative to the dump station, a standard straight fitting forces your sewer hose to bend sharply or pull sideways. Over time that stress fatigues the hose, causes leaks at the coupling, and makes hookup more difficult than it needs to be.
The Lippert 2024121184 solves that with a 45-degree offset angle built right into the adapter body. Slip it onto the drain valve bayonet, twist to lock, and your hose runs at a far more natural angle -- less strain, faster hookup, and a tighter seal at the coupling every time.
The clear ABS body is not just for show. Being able to watch the flow lets you confirm both the black and gray tanks have fully evacuated, and it gives you a real-time visual cue when the flush water is running clear.
Routes the hose at an easier angle than a straight adapter, reducing pull and bend stress on the hose and coupling.
Transparent housing lets you visually confirm tank evacuation and watch for clear flush water without guessing.
Standard 3-inch RV bayonet connection twists onto the drain valve and locks in place -- no tools needed.
Manufactured by Lippert, a major OEM supplier to RV builders. Part number 2024121184 for exact replacement ordering.
The 3-inch bayonet fitting is the standard sewer connection used on the vast majority of North American RVs. The adapter slides over the gate valve outlet and rotates approximately 90 degrees to lock into the bayonet lugs. No wrenches, no threads to cross, no sealant required at this joint. The downstream end of the adapter accepts a standard 3-inch RV sewer hose fitting in the same fashion.
Experienced full-timers and dump-station regulars know the value of a clear adapter. You can see the moment solids have cleared the line, watch for any backflow if the dump station is slow, and confirm your tank rinse is working before you disconnect. The clear body on the Lippert 2024121184 gives you that visibility without any added complexity.
This adapter uses the standard 3-inch RV bayonet fitting found on most North American motorhomes, travel trailers, fifth wheels, and toy haulers built in the last 30-plus years. If your drain valve uses a non-standard proprietary connection, verify your fitting diameter and style before ordering. This adapter is not intended for 4-inch sewer connections found on some larger coaches.