A complete, ready-to-use sewer hose system engineered for fast, no-mess dump station hookups. Two 10 ft sections of heavy-duty 15 mil HTS vinyl hose connect end-to-end for a 20 ft reach, while the included 4-in-1 adapter handles nearly every dump station opening you will encounter on the road. Everything you need is in the box -- no extra fittings required.
Dump station configurations vary from campground to campground. Camco built the Revolution kit around that reality. The removable 4-in-1 adapter steps down to fit four common dump station opening sizes, so you are not fumbling with a pocketful of adapters when the line is forming behind you. The translucent elbow lets you see flow and confirm the tank is fully drained before you disconnect.
Each hose compresses from 10 ft down to just 2 ft for storage -- a 5:1 compression ratio that keeps your basement compartment or 4-inch square bumper from being taken over by sewer equipment. Both hoses store compactly, and all caps and fittings stow with the kit.
Pre-attached swivel lugs and bayonet fittings rotate a full 360 degrees so the hose lies flat without kinking or twisting during hookup.
Heavy-wall vinyl resists pinholes and punctures better than thin-gauge alternatives, and the non-restrictive bore promotes free flow for faster tank emptying.
One removable adapter fits four different dump station inlet sizes -- the most common compatibility range in the category. Works at most campgrounds, RV parks, and public dump stations.
See waste flow in real time and confirm tanks are fully cleared before capping off -- no guesswork, less mess.
Camco packages the Revolution kit as a true all-in-one system. You will not need to purchase separate swivel adapters or end caps to get started:
One of the most common frustrations with economy sewer hoses is arriving at the dump station only to deal with a hose that wants to spiral and kink. The Revolution uses pre-attached swivel lugs and bayonet fittings at both connection points. Rotate either end independently to align with your RV outlet and the dump station inlet without fighting the hose. The result is a straight, low-profile run that drains faster and is easier to rinse and store.
Because the kit ships as two separate 10 ft hoses rather than one 20 ft piece, you have flexibility. Use a single 10 ft section for close hookups and save the second for when you need full reach. The bayonet-style ends connect the two sections securely without tools.
The 15 mil HTS (High-Tensile-Strength) vinyl wall is meaningfully thicker than the 10-12 mil vinyl used in entry-level sewer hoses. Thicker walls resist the small pinholes and micro-tears that develop over seasons of use, UV exposure, and repeated folding. The brown color is standard for RV sewer applications. Camco backs the kit with a limited 90-day manufacturer warranty.