Stop dragging a garden hose through your window just to rinse the black tank. The Camco Quickie Flush permanently mounts outside the RV and lets you hook up a standard garden hose, blast out the holding tank, and disconnect -- all from outside. When the discharge water runs clear, you're done.
The Quickie Flush is a permanently installed tank rinser designed for RV black tanks (and gray tanks where accessible). It connects to a standard garden hose fitting on the outside of your RV, sends a pressurized rinse stream into the tank, and lets the waste discharge out through the sewer connection. No awkward hose routing through windows or vents, and no risk of cross-contaminating your potable water line thanks to the built-in backflow preventer.
Camco includes an 8-foot hose so you have enough reach to work comfortably at your site. The unit is designed for permanent installation -- mount it once and it's ready every dump day.
Hooks to a standard garden hose from outside the RV -- no hose through windows or vents required.
Permanently integrated check valve keeps tank waste and sewer gases from contaminating your fresh water supply line.
Comes with an 8-foot dedicated rinse hose. Keep it separate from your drinking water hose -- this one is for tank duty only.
Mounts to your RV exterior once. Ready for every dump station visit without any extra setup or tools.
Proper technique gets the tank cleaner and protects your equipment:
The Quickie Flush is designed for permanent installation on the exterior wall of your RV, typically near the sewer outlet. Installation involves drilling a hole through the exterior sidewall into the holding tank (or using existing access), securing the rinser body, and running the internal spray nozzle into the tank. Consult your RV's floor plan to confirm tank location before drilling.
The Quickie Flush inlet accepts a standard garden hose (3/4 in. GHT female connection, typical of this product family). Use a dedicated, non-potable-rated hose for tank flushing -- do not reuse your drinking water hose for sewer rinse duty. Campsite water pressure between 40 and 60 PSI is ideal for effective rinsing without stressing the tank walls.