Product price is not filled in. This product cannot be purchased.
Stop the sway and bounce in your parked RV with a pair of Camco Eaz-Lift telescopic stabilizing jacks. Adjustable from 16 to 30 inches, these steel jacks set up in seconds with quick-release pins and wide foot pads -- no tools, no hassle, real stability at all four corners of your rig.
Whether you are parking at a full-hookup campground, boondocking on uneven ground, or settling in for a long stay, stabilizer jacks are one of the most practical upgrades you can make. The Camco Eaz-Lift 48860 set gives you two heavy-duty telescopic jacks that place under the frame or A-frame tongue area of your travel trailer, fifth wheel, or pop-up camper to eliminate unwanted movement while parked.
Each jack extends from a compact 16 inches up to 30 inches, covering most RV frame heights without needing adapters or extra hardware. The quick-release pin system lets you set the working height in seconds, and the wide foot pad distributes load across soft ground or pavement to prevent sinking.
Telescopic steel tube adjusts in seconds with a quick-release pin. Covers most RV frame heights without extra extensions.
3,000 lb per jack -- engineered to stabilize, not lift. Keeps parked RVs steady under normal occupant loads.
No wrenches, no threading. Drop the inner tube to the right height, insert the pin, and you are done. Packs flat for storage.
Broad base distributes load and resists sinking into soft ground. Add a leveling pad (sold separately) on very soft surfaces.
The Eaz-Lift 48860 is a staple item for travel trailer and pop-up camper owners. These jacks are designed for placement at the mid-frame or corner frame points to minimize the rocking and bouncing that happens when people move around inside the RV. They are not a substitute for your landing gear or tongue jack -- they are stabilizers, not lifting devices.
Leveling pads, lug wrenches, electric drills, and jack pads are not included. A drill with a 3/4" socket or a T-handle bar will speed up the final tightening step.
Scissor jacks are the classic choice and work well on level ground. Telescopic jacks like the Eaz-Lift 48860 tend to set up faster, handle a wider height range, and are less prone to jamming from road grime or corrosion on the threaded shaft. If your current scissor jacks require excessive cranking time or have become stiff, these telescopic jacks are a practical, durable replacement.
These jacks are rated for stabilizing a parked and already-leveled RV. Do not use them to lift the RV for tire changes, axle work, or any task requiring the frame to be raised off the ground. The quick-release pin system is designed for static stabilizing loads only.