Keep your 20 lb or 30 lb propane tank upright and stable whether you are parked at a campsite, in storage, or hauling down the road. The Camco 57236 stabilizing base clips securely to the bottom of standard propane cylinders and provides a wide, flat footing that resists tipping on uneven ground or during transport.
A tipped propane cylinder is more than an inconvenience -- it can stress the valve, create a leak point, or cause damage to other gear stored nearby. Most standard 20 lb and 30 lb cylinders have a relatively narrow base ring that makes them prone to tipping when set on gravel, grass, or a cargo bay floor.
Camco's stabilizing base solves this with a low-profile, wide-diameter platform that snaps onto the existing base collar of the cylinder. No tools required. It adds just 0.9 lbs and stores flat when not in use.
The 16-inch bottom diameter and 13-inch top opening spread the cylinder's weight across a much larger area, dramatically reducing the chance of tipping on soft or uneven terrain.
Made from rugged, impact-resistant plastic engineered to handle the rough conditions of an RV storage bay, truck bed, or outdoor campsite setup.
The base simply attaches to the lower collar of your 20 lb or 30 lb cylinder. Installation and removal take seconds -- no hardware, clamps, or straps needed.
Adds almost no weight penalty. Easy to toss in the storage bay alongside your tank so it is always on hand when you need it.
This base is especially useful for:
This base is designed for standard 20 lb and 30 lb DOT propane cylinders -- the type commonly used with portable grills, patio heaters, and RV auxiliary propane setups. These cylinders are sometimes labeled by water capacity (47 lb WC for 20 lb tanks, 72 lb WC for 30 lb tanks) but are universally recognized by the standard base collar diameter that this stabilizer fits.