Drill socket adapter for raising and lowering RV scissor jacks faster than hand cranking; fits 3/8" or 1/2" power drills and 3/4" hex drive jacks.
The Camco 57363 scissor jack socket helps reduce the time and effort needed to raise or lower RV scissor jacks. Instead of hand cranking each jack, this adapter allows a compatible power drill to do the work.
This socket is designed for scissor jacks with 3/4" hex drive heads and fits 3/8" or 1/2" power drills. It is a handy campsite setup tool for RV owners who want faster scissor jack adjustment during leveling and stabilization.
Allows a compatible power drill to operate RV scissor jacks
Works with scissor jacks that use 3/4" hex drive heads
Designed to fit common 3/8" and 1/2" power drills
Helps reduce manual cranking during campsite setup and teardown
This adapter is intended for RV scissor jacks with 3/4" hex drive heads. It is not the same as Camco’s 1/4" quick-connect scissor jack socket. Before ordering, verify the jack drive size and confirm your drill chuck style is compatible.
Before Starting: Confirm the scissor jack uses a 3/4" hex drive head and inspect the jack for damage, binding, or corrosion before operating it with a drill. Basic Use Steps: 1. Confirm Fit: Make sure the jack drive head is 3/4" hex and that the socket seats fully. 2. Attach to Drill: Install the socket adapter into a compatible 3/8" or 1/2" power drill chuck. 3. Seat Socket: Place the 3/4" socket fully over the scissor jack drive head. 4. Operate Slowly: Run the drill at a controlled speed to raise or lower the jack. 5. Watch Jack Travel: Stop before the jack reaches its travel limits or begins to bind. 6. Check Stability: Confirm the jack is properly positioned and supporting/stabilizing the RV as intended. 7. Store Tool: Remove the socket from the drill and store it with RV leveling or setup tools.
Package Contents: • 1 Camco 57363 3/4" scissor jack socket adapter NOT Included — May Also Need: • Drill or driver • Scissor jack • Leveling blocks or jack pads • Wheel chocks • Replacement scissor jack parts if the jack is damaged or binding This listing is for the scissor jack socket adapter only. Use with compatible 3/4" hex drive scissor jacks and a suitable 3/8" or 1/2" power drill.
To confirm compatibility before ordering, have the following ready: • Scissor jack drive head size • Drill chuck size/type • Photos of the jack drive head, if unsure • Whether you need a standard drill socket or quick-connect style adapter • RV make, model, and year, if available Why this matters: Some scissor jack sockets look similar but differ by drive style. Camco 57363 is intended for use with 3/8" or 1/2" power drills, while quick-connect versions use a 1/4" hex quick-change shank.
Match this adapter by jack drive size and drill chuck compatibility. It is intended for scissor jacks with 3/4" hex drive heads and 3/8" or 1/2" power drills.
The socket adapter speeds up scissor jack operation, but safe jack placement, stable ground, wheel chocking, and controlled drill use are still important.