Designed for RVs, travel trailers, fifth wheels, and multi-appliance propane systems, the Camco 59322 integrates both the first and second regulation stages into a single horizontal-mount body. The result is a steadier, more consistent gas supply to all downstream appliances -- furnaces, ranges, water heaters, and refrigerators -- at a regulated 11 inches water column (WC) output pressure, regardless of tank fill level or ambient temperature fluctuations.
Single-stage regulators force each appliance to cope with variable tank pressure as it drops throughout the fill cycle. A two-stage design solves this by performing a coarse pressure reduction at the first stage (from tank pressure down to an intermediate level) and then a fine, precise reduction at the second stage to the working pressure your appliances require. The Camco 59322 handles both stages in one compact, horizontal-oriented housing -- no separate high-pressure regulator pigtail required.
The horizontal orientation keeps the regulator vent pointing downward and away from moisture, which is important for longevity in exposed compartment installations. At 160,000 BTU per hour maximum capacity, this regulator supports a typical full RV appliance load including a furnace, two-burner cooktop, oven, water heater, and absorption refrigerator running simultaneously.
First and second stages in one body deliver smoother pressure regulation without a separate high-pressure stage regulator or pigtail assembly.
Handles the full combined load of a typical RV appliance package -- furnace, range, oven, water heater, and refrigerator -- without pressure drop or surging.
Regulated outlet pressure of 11 inches water column meets the standard operating requirement for most RV propane appliances rated for natural-gas-equivalent LP pressure.
Certified by the Canadian Standards Association (CSA) for safe use in propane gas systems, meeting applicable standards for RV and recreational vehicle LP installations.
Propane regulators must be installed in the correct orientation for the internal diaphragm and vent to function properly. The 59322 is specifically built for horizontal installation, meaning the regulator body mounts with the vent port facing downward. This prevents rain, condensation, and debris from entering the vent, which can cause freeze-ups or erratic pressure regulation. If your existing regulator bracket or manifold is configured for horizontal mounting, the 59322 is a direct-fit replacement without bracket modification.
Camco backs this regulator with a limited 90-day warranty against defects in materials and workmanship from the date of purchase.