Home > Covers > Pop-Up Trailer Covers >

CarCover Gold Shield 5L Folding Pop-Up Camper Cover 5FC-0810 -- Fits 8 to 10 Feet Long

CarCover Gold Shield 5L Folding Pop-Up Camper Cover 5FC-0810 in gray, fits 8 to 10 foot pop-up campers, 5-ply breathable fabric with buckle system
UnitedCovers 5-Layer Folding Pop-Up Camper Cover UC-FC-0810 - 8' to 10'
 
Alternative Views:


🛡️ All-season cover for 8'–10' pop-up campers
🌧️ Shields from rain, snow, sun, and debris
🌀 Windproof fit prevents flapping and tears
💨 Vents reduce moisture and mildew
List Price: $239.49
: $100.49
You save $139.00!
Part Number: UC-FC-0810
Manufacturer: UnitedCovers
NOTE: Ground Shipping Only

Quantity in Stock :10

Free Shipping
Availability: In Stock
Qty:

 
CarCover Gold Shield 5L Lifetime Warranty CarCover Gold Shield 5L Folding Pop-Up Camper Cover -- Fits 8 to 10 Feet

Full-season protection for your folding pop-up camper. The Gold Shield 5L cover uses a 5-ply breathable construction on top and 3-ply on the sides to block UV rays, rain, snow, hail, bird droppings, tree sap, and dirt -- while still letting moisture vapor escape so mildew never gets a foothold. Designed specifically for pop-up campers in the 8 to 10 foot length range, it installs without tools and stores compactly when not in use.

All-Weather Defense Built Into Every Layer

Most budget covers use a single layer of woven polypropylene. The Gold Shield 5L stacks five layers across the top panel -- four polypropylene PLUS layers bonded around a central micro-porous film -- and three layers on the side panels. That micro-porous film is the key: it sheds liquid water while allowing water vapor to pass through, so condensation and humidity escape rather than collecting under the cover. The result is a dry interior surface even during prolonged storage in wet climates.

The top layer is extended downward along all four sides, adding an overlap that seals out wind-driven rain at the edges. Double-line stitching at all seam junctions reinforces the cover where stress concentrates most during high-wind conditions.

5-Ply Top Panel

Four polypropylene PLUS layers plus one micro-porous film layer block water, UV, and debris while staying breathable.

3-Ply Side Panels

Two polypropylene PLUS layers and one micro-porous film layer protect the sides without trapping moisture against the finish.

Secure Buckle System

Weighted adjustable buckles eliminate slack and prevent the cover from billowing or shifting in gusty conditions.

Elastic Corner Hems

Elastic hems at the front and rear corners pull the cover snug so wind cannot lift the edges away from the camper.

Fitment and Sizing

This cover is sized for folding pop-up campers measuring 8 to 10 feet in length when closed and ready for storage. The cover's own dimensions are approximately 10.5 ft long x 7.17 ft wide x 3.75 ft tall, providing an overlap beyond the camper body on all sides. Verify your camper's closed length, width, and height against these cover dimensions before ordering -- a proper fit prevents billowing and wind damage.

Slip-Seam Profile: The cover's contoured slip-seam design conforms closely to the pop-up's roofline and sides, reducing wind catch and drag. Combined with the adjustable buckles, this significantly lowers the risk of the cover shifting or lifting during storage in exposed locations.

Protection Coverage

The Gold Shield 5L is rated to protect against the following common storage hazards:

  • Rain and water infiltration -- micro-porous film layer sheds liquid water
  • Snow and ice accumulation
  • UV radiation -- reflective outer surface reduces heat buildup and UV degradation of the camper's finish
  • Hail -- layered construction provides cushioning against light to moderate hail
  • Bird droppings and tree sap -- smooth outer surface resists adhesion
  • Dirt and dust -- blocks over 98% of airborne particulates from reaching the surface
  • Mildew and rot -- micro-porous film promotes airflow that prevents moisture stagnation

Installation and Convenience

The cover installs without tools. Weighted buckles drop into position and tighten by hand; elastic corner hems stretch over the front and rear ends to lock the cover in place. A typical installation takes one or two people about 10 to 15 minutes. The cover folds down into the included storage bag for compact off-season storage in a garage or shed.

What's Included: Gold Shield 5L cover (gray), adjustable buckle strapping system, patch kit for field repairs, and a zippered storage bag.
Storage Tip: Before covering, make sure the camper's canvas, seams, and zippers are dry. Even though this cover is breathable, starting with a dry surface reduces the chance of mildew forming on the canvas itself during long storage periods. Inspect and re-tension the buckles after the first heavy wind event.
Lifetime Manufacturer Warranty: CarCover backs the Gold Shield 5L with a lifetime warranty against defects in materials and workmanship. The included patch kit lets you address minor field damage without waiting for a warranty claim.

Cover Specifications

Part Number5FC-0810
ManufacturerCarCover
Product LineGold Shield 5L
ColorGray
Cover Weight18 lbs
WarrantyLifetime Manufacturer Warranty

Cover Dimensions

Cover Length10.5 ft (126 in)
Cover Width7.17 ft (approximately 86 in)
Cover Height3.75 ft (45 in)
Fits Camper Length8 ft to 10 ft (closed, stored position)
Vehicle TypeFolding pop-up camper / tent trailer

Fabric Construction

Top Panel Layers5-ply: 4x polypropylene PLUS + 1x micro-porous film
Side Panel Layers3-ply: 2x polypropylene PLUS + 1x micro-porous film
BreathabilityYes -- micro-porous film allows vapor escape
Water ResistanceYes -- liquid water is repelled at outer layers
UV ResistanceYes -- reflective outer surface reduces UV and heat
Dirt/Dust BlockOver 98% particulate filtration claimed
StitchingDouble-line at all seam junctions

Securing System

Buckle TypeAdjustable weighted buckles, hand-tighten
Corner HemsElastic hems at front and rear corners
Slip-SeamYes -- contoured profile reduces wind lift
Tool RequirementNone -- tool-free installation

In the Box

CoverGold Shield 5L gray cover with buckle straps
Patch KitIncluded for minor field repairs
Storage BagIncluded, zippered for compact off-season storage
Important Information
  • Measure your folding pop-up camper in its fully closed and lowered storage position before ordering. The cover is designed for campers 8 to 10 feet in length; ordering the wrong size will result in poor fit and reduced protection.
  • This cover is designed for storage use. It is not intended to be used while the camper is in motion or being towed.
  • Ensure the camper canvas, roof, and seams are clean and dry before covering for extended periods. Covering a wet or dirty surface can trap moisture against the finish.
  • Inspect the buckle tension and cover position after the first heavy wind event; re-tension as needed to prevent billowing or edge lift.
  • The cover is water-resistant, not fully waterproof. In sustained extreme precipitation, verify no water is pooling on the cover surface and allow for drainage.
  • Store the cover in the included storage bag when not in use to prevent UV degradation of the cover fabric itself during off-season storage.
How To Measure Your Folding Popup Camper:

Length: Measure the longest distance from the front to the rear of the camper, ensuring to include the spare tire and ladder. Be sure to exclude the hitch and tongue from your measurements!

Height: Measure the sidewalls of the camper from the highest point of the roofline down to the outer frame. Remember to exclude ground clearance, roof-mounted accessories, vents, and air conditioning units. If your trailer is equipped with an air conditioner and the height measurement (excluding the A/C unit) is within 4 inches of the maximum limit for the cover you're considering, we recommend opting for the next larger size to accommodate the air conditioner.



How to Install Your Pop-up Camper Cover:

1. Identify the Front: Most folding pop-up camper covers feature a "Front" tag on the interior, either sewn or stamped. Use this tag to clearly determine the front and rear of your cover.
2. Check Tag Placement: Ensure that all tags are located on the inside of the cover. Installing the cover upside down may lead to damage to your vehicle's paint.
3. Prepare the Cover: Fold the sides of the cover toward the center for easier handling.
4. Roll the Cover: Starting from the rear, roll the cover toward the front, leaving the loose end at the front.
5. Position the Rolled Cover: Place the rolled cover at the rear of the folding pop-up camper.
6. Unfold the Cover: Begin at the front of the camper and unfold the cover from side to side, allowing it to drape down over the sides as you move toward the rear.
7. Adjust as Needed: Walk around the camper and make any necessary adjustments to ensure the cover fits snugly from side to side.

Removal:

1. Release All Fastenings: Carefully undo all straps and zippers securing the folding pop-up camper cover.
2. Lift the Front: Raise the front of the cover to the top of the folding pop-up camper.
3. Lower from the Rear: From the rear of the camper, gently pull the cover down to remove it completely.

For Cleaning:

Proper care of your RV cover is essential for maintaining its performance and water resistance. Contaminants like dirt and grease can damage the cover, so regular washing is recommended for long-lasting protection.

You can wash the cover by hand or in a washing machine. For hand washing, install the cover on your RV, rinse it with a hose, then use a cloth and multi-purpose cleaner to scrub. Rinse again and either towel dry or let it air dry.

For machine washing, use the largest machine available, set it to gentle mode, and wash with mild powder detergent in cold water—avoid bleach and fabric softeners. Rinse the cover twice to remove all detergent, and always air dry.



Browse for more RV Accessories in the same category as this item:

Covers > Pop-Up Trailer Covers
Covers


$25.49
$95.54
$14.99
$27.81