Keep your Carefree over-the-door manual awning arms locked flat against your RV sidewall every time you hit the road. The 901045 sliding arm lock set gives you a fast, secure way to pin both arms in the travel position -- no bungees, no jury-rigged straps, no forgotten steps that can cost you an awning at highway speed.
The Carefree 901045 is the factory-correct replacement for the sliding arm locks used on Carefree of Colorado over-the-door (OTD) manual awning systems. If your original locks are cracked, missing, or no longer gripping reliably, this two-piece set restores the same secure travel position you had when the rig was new.
Each lock slides onto the awning arm rafter and engages a catch that holds the arm tight to the RV wall. Setup at camp is equally quick -- slide the lock to disengage, deploy the awning, and you are done. All mounting hardware is included so you are not making a parts run before the weekend trip.
Slides and locks onto the awning arm rafter, holding it flush against the RV sidewall to prevent road vibration from working the arm loose.
Single sliding motion locks or releases each arm -- no tools required at the campsite or in the driveway.
Kit contains both arm locks and the mounting hardware needed for a complete installation with no additional parts required.
Manufactured by Carefree of Colorado to OEM tolerances, ensuring correct fit on Carefree OTD awning systems.
These arm locks are designed specifically for Carefree of Colorado over-the-door (OTD) manual awning systems. If you have a Carefree OTD awning and the arm locks are broken, missing, or no longer holding, part number 901045 is the correct OEM replacement.
An unsecured awning arm can vibrate outward at highway speeds, catch wind, and pull the entire awning fabric and roller assembly off the mounting brackets -- a repair that costs far more than a set of arm locks. Even RVers who drive short distances benefit from a reliable lock, because parking lot speeds and wind from passing semis are enough to stress an unlocked arm.