Stop worrying about your awning in unexpected wind gusts. The Carefree SR0093 adds automatic wind-sensing retraction to your Travel'r awning -- no manual intervention required. When the motion sensor detects wind-driven movement, it triggers the awning to retract and protect itself from damage.
One of the most common causes of RV awning damage is an unexpected windstorm while the owner is away from the rig or asleep. The Carefree SR0093 Motion Detection Retractor solves that problem by adding an always-on motion sensor to your existing Travel'r awning system. When the sensor detects motion caused by wind, it automatically sends the retract command -- no remote, no app, no manual action needed.
The unit ships factory pre-set for sensitivity, so out-of-the-box installation is straightforward. For times when you want full manual control -- say, when leaves or passing vehicles might trigger a false retract -- the auto-retract function can be switched off independently.
Sensor detects wind-driven awning movement and triggers automatic retraction before damage occurs.
Ships ready to install with calibrated sensitivity -- no complex adjustment required during setup.
Auto-retract can be toggled off so the awning stays extended when conditions allow or when you prefer manual control.
Works with adjustable, flat, and steep pitch Travel'r awning configurations across the supported size range.
The SR0093 is compatible with Carefree Travel'r awnings measuring 12 feet to 21 feet in length. It works across adjustable, flat pitch, and steep pitch model settings, making it a practical upgrade for a large portion of the Travel'r lineup.
No additional sensor or wiring harness is required for a standard installation on a compatible Travel'r awning.
The motion sensor responds to awning movement caused by wind. In very sudden or severe gusts, any awning can sustain damage before the retract cycle completes. Always manually retract your awning when storms are forecast or when leaving the campsite unattended for extended periods.