Turn your RV patio into an outdoor living space after dark. The Carefree SR0112LED gives you 15 RGB color options plus a dedicated white mode, all controlled from an included RF remote. No drilling, no hardwiring required -- stick it up and plug it in. Compatible with virtually any awning from 10 to 21 feet.
The SR0112LED is Carefree of Colorado's purpose-built LED light kit for RV roller awnings. The adhesive-backed strip mounts flat to any clean surface -- roller tube, awning rail, or fascia -- in minutes. Run it from shore power with the included 110V AC adapter or wire it permanently into your rig's 12V DC system for a cleaner, always-ready setup.
The strip ships at 16 feet and trims down to fit shorter awnings. For awnings longer than 16 feet (up to 21 ft), the strip mounts directly on the standard roller tube rather than the full awning length, keeping installation clean and manageable.
Full-color RGB mode with 15 selectable colors. Dedicated white LED channel with 3 brightness settings for practical task lighting.
Dynamic lighting modes for parties and events. Smooth color-fade cycling, fast strobe, and single-color flash all accessible from the RF remote.
3M adhesive-backed strip mounts to any flat surface. No holes, no brackets, no tools required for a basic setup.
Plug into 110V AC with the included adapter or wire into your 12V DC system for permanent, battery- or solar-friendly operation.
The LED strip is pre-cut to 16 feet and designed to trim shorter. Here is how fitment works across common awning sizes:
The 3M-backed strip bonds to powder-coated aluminum awning rails, roller tubes, fascia boards, and slide toppers. Surface must be clean, dry, and above 50 deg F for proper adhesion. Press firmly for 30 seconds along the full length for best hold.
The included water-resistant RF remote lets you change colors, brightness, and lighting modes from across the campsite -- no line-of-sight required like older infrared remotes. Switch between RGB party mode and clean white work light without getting up from your chair.
On shore power or at a campground with hookups, plug into the included 110V AC adapter. When boondocking or dry camping, wire the kit into your 12V DC fuse panel for battery-powered operation. The 12V draw on LED strips this size is minimal -- typically under 2A at full brightness -- making it solar-friendly.
Wipe the LED strip with a damp cloth to remove road grime and dust. Avoid pressure washing directly on the strip or connectors. Store the remote inside the RV when not in use to extend battery life. Check adhesive bond annually -- re-adhere any lifted sections with 3M automotive trim tape.
This kit complements any Carefree of Colorado roller awning, including the Carefree Spirit, Travel'r, and Fiesta series. Also works with Dometic and A&E awnings that use standard roller tubes. Add a second strip or Carefree patio lights for extended coverage on large slide-out awnings.