Home > Awning Sun & Shade > Awning Accessories >

Lippert 308474 Solera Interior Awning Switch Kit with Plate, 40 Amp, Black

Lippert 308474 Solera Interior Awning Switch Kit with black mounting plate and 40-amp switch for RV power awning control
Lippert Solera Interior Awning Switch Kit with Plate, 40 Amp, Black
 
Alternative Views:


List Price: $16.99
: $13.99
You save $3.00!
Part Number: 308474
Manufacturer: Lippert

Quantity in Stock :31

Availability: In Stock
Qty:

 
Lippert 40 Amp Solera Power Awning Lippert 308474 -- Solera Interior Awning Switch Kit with Plate, Black

Worn-out or damaged interior awning switch? This Lippert OEM replacement kit puts push-button extend and retract control back in your hands, right from inside the RV. Includes everything you need for a clean, direct swap on compatible Solera power awning systems.

Direct OEM Replacement for Solera Power Awning Controls

The Lippert 308474 is a factory-matched interior switch kit for Solera electric awning systems. When your original switch becomes sticky, unresponsive, cracked, or simply fails to send the signal to extend or retract the awning, this kit restores full interior control without rewiring or panel modifications.

The kit ships complete with the 40-amp rocker switch, a black switch mounting plate, and a pre-terminated wire harness -- the three components most commonly needed when replacing a failed interior awning switch assembly. The black finish matches standard Solera interior trim on a wide range of Lippert-equipped RVs.

40-Amp Rating

Rated at 40 amps to handle the full current draw of Solera's 12V electric awning motor without nuisance tripping or contact burn.

Complete Kit

Switch, mounting plate, and pre-terminated wire harness included -- no hunting for separate components to complete the repair.

Interior Mounting

Designed for in-wall or in-panel installation inside the RV, giving you a dedicated push-button awning control at your fingertips.

OEM Fit

Lippert-engineered replacement part (MPN 308474) built to match original Solera system wiring and mounting geometry.

What Is Included

  • 1x 40-amp interior rocker switch (black)
  • 1x Black switch mounting plate
  • 1x Pre-terminated wire harness

Clean, Low-Effort Installation

Because the wire harness is pre-terminated to match the Solera system connector, installation is straightforward for anyone comfortable with basic 12V wiring work. Disconnect the old harness, remove the old switch and plate, seat the new plate, connect the harness, and snap the switch into place. No splicing required on most compatible units.

Compatibility and Fitment

This switch kit is designed for Lippert Solera power awning systems that use an interior push-button control switch mounted inside the RV coach wall or interior panel. It is the correct replacement for units where the original interior switch carries part number 308474.

Solera power awnings are factory-installed on a broad range of travel trailers, fifth wheels, and motorhomes by Forest River, Coachmen, Keystone, Heartland, and other manufacturers that spec Lippert components. If your rig left the factory with a Lippert Solera electric awning and an interior rocker-style switch, this kit is likely the correct replacement -- verify against your existing part number before ordering.

Not Sure This Is the Right Switch?

Lippert produces several awning control configurations -- exterior switches, handheld remotes, and interior kits with different amp ratings. Cross-reference your existing switch or awning control module part number with Lippert's parts list for your specific awning model before ordering. The 308474 is the interior-mount, 40-amp, black-finish variant for the Solera line.

When to Replace Your Awning Switch

  • Switch physically cracks, chips, or the rocker no longer returns to center
  • Awning motor does not respond when switch is pressed (after ruling out fuse and motor issues)
  • Intermittent response -- awning extends but won't retract, or vice versa
  • Water intrusion behind the switch plate causes corrosion on contacts
  • Replacing a missing switch during a renovation or after purchasing a used RV

Maintenance Tips

  • Use a contact-safe electrical cleaner on switch terminals during installation to ensure a clean connection at the harness plug.
  • After installation, test extend and retract functions fully before closing up the panel.
  • Check the 40-amp inline fuse or circuit breaker protecting the awning circuit if the new switch still does not operate the awning.
  • Verify the awning motor is functional independently (using the exterior switch or remote, if equipped) before concluding the interior switch is the failed component.

Part Identification

ManufacturerLippert Components
Part Number (MPN)308474
Vendor Part Number15-9367
UPC848150057846
Product LineSolera Awning Accessories
Finish / ColorBlack

Electrical Specifications

Switch Rating40 Amps
System Voltage12V DC (standard RV house power)
Switch TypeMomentary rocker (extend / retract)
HarnessPre-terminated, plug-and-play for Solera system

Kit Contents

Interior SwitchIncluded -- 40-amp rocker, black
Mounting PlateIncluded -- black, interior panel style
Wire HarnessIncluded -- pre-terminated
HardwareRefer to kit contents; basic installation hardware typically included

Application and Fitment

Awning SystemLippert Solera power awning (interior switch models)
Switch LocationInterior -- in-wall or in-panel coach mount
OEM CompatibilityReplaces original Lippert interior switch assembly on Solera-equipped RVs
Common PlatformsTravel trailers, fifth wheels, and motorhomes with factory Lippert Solera awnings

What Is NOT Included

Awning FabricNot included
Awning MotorNot included
Exterior SwitchNot included -- interior switch only
Remote ControlNot included
Control ModuleNot included

Important Information

  • Verify your existing interior switch part number matches 308474 before ordering. Lippert offers multiple awning switch configurations; an incorrect switch will not integrate with your awning system.
  • Disconnect 12V power to the awning circuit at the breaker or fuse panel before removing the old switch. Awning motors draw high amperage and live wiring poses a burn or short-circuit risk.
  • This kit replaces the interior switch only. If the awning motor, control module, or exterior switch is the failed component, a different Lippert replacement part is required.
  • Confirm the awning motor and associated wiring are in good condition before installing the new switch -- a failed motor will not respond even with a new switch in place.
  • This product is intended as a replacement part for an existing Solera power awning installation. It is not a standalone awning control solution.


Browse for more RV Accessories in the same category as this item:

Awning Sun & Shade > Awning Accessories
Awning Sun & Shade


$16.43
$3.35
$40.66
$49.49