Replacement protective cap for the discharge nozzle on Thetford Sani-Con macerator systems. Keeps the nozzle tip sealed and clean during storage and transport between dump sessions. For all Sani-Con Turbo system nozzles. Previously known as Thetford part number 97514.
The Thetford 50022 is the replacement protective cap for the discharge nozzle of the Thetford Sani-Con Turbo macerator system — the small cap that snaps over the nozzle tip after dumping to keep it sealed, clean, and protected during travel and storage. Previously known as Thetford part number 97514, this is the same OEM replacement cap under an updated part number.
The Sani-Con discharge nozzle is the business end of the system — the multi-adapter fitting that inserts into dump station inlets. Between dump sessions, the nozzle cap keeps residual moisture and waste sealed inside the nozzle tip, prevents the nozzle's adapter surfaces from being contaminated during storage, and protects it from road debris. When the original cap is lost or damaged, the 50022 is the direct OEM replacement. A garden hose connection is included for remote dumping applications.
• 1x Sani-Con discharge nozzle cap • Garden hose connection Related Sani-Con parts: • 49998 / 97520 — Complete discharge nozzle with clamp (full nozzle assembly) • 97521 — 21-ft discharge hose with union and clamp • 97517 — Access cover kit • 97518 — Pump with tank housing replacement
The 50022/97514 is the protective cap only — it does not include the discharge nozzle itself. If the nozzle body is damaged or lost, order the complete nozzle assembly (49998 / 97520) instead, which includes both the nozzle and clamp. This cap is for Sani-Con Turbo systems only. It is not compatible with the older Sani-Con Evac system.