Replacement round bar spring arm for Fastway e2 weight distribution hitch systems. Rated for 800 lb tongue weight and 8,000 lb gross trailer weight. Designed for compatible Fastway e2 round bar hitches.
The Fastway 94-02-0899 is a replacement round bar spring arm for compatible Fastway e2 weight distribution hitch systems. The spring arm connects into the e2 round bar hitch head and rests on the trailer-frame L-bracket during towing.
This bar is rated for 800 lb tongue weight and 8,000 lb gross trailer weight. It is useful when replacing a missing, damaged, worn, bent, or corroded round bar spring arm on a compatible 8K Fastway e2 round bar hitch.
Replacement round bar spring arm for compatible Fastway e2 weight distribution hitches
Designed for Fastway e2 round bar systems with an 800 lb tongue weight rating
Matches Fastway e2 round bar hitch systems rated for 8,000 lb gross trailer weight
Connects to the e2 round bar hitch head and rests on the trailer-frame L-bracket
This is a round bar spring arm for compatible Fastway e2 round bar hitch systems. It is not the trunnion-style spring arm. Weight distribution hitches are weight-sensitive. Confirm your hitch style and loaded trailer tongue weight before ordering. For a complete pair, order two spring arms.
Replace the spring arm if the original bar is missing, bent, cracked, heavily corroded, excessively worn, or no longer seats correctly in the hitch head or on the L-bracket. Visible damage: Do not tow with a bent, cracked, or distorted spring arm. Wrong rating: Make sure the replacement bar matches the needed tongue weight range for the trailer. Wrong bar style: Use this part only with compatible Fastway e2 round bar systems, not trunnion bar systems. Used hitch setup: This part is helpful when restoring a used e2 round bar hitch that is missing one spring arm.
Installation Steps: 1. Park Safely: Park the tow vehicle and trailer on level ground before servicing the hitch 2. Confirm Compatibility: Verify the hitch is a Fastway e2 round bar system rated for 800 lb tongue weight / 8,000 lb GTW 3. Insert Spring Arm: Install the round bar spring arm into the e2 round bar hitch head 4. Seat on L-Bracket: Place the spring arm onto the trailer-frame L-bracket according to the Fastway e2 owner’s manual 5. Secure Retaining Hardware: Confirm the L-pin and L-pin clip are properly installed at the trailer-frame bracket 6. Final Safety Check: Confirm both spring arms, L-brackets, L-pins, clips, hitch head, and shank are properly installed before towing Always follow the Fastway e2 owner’s manual for your specific hitch model. Do not tow with missing, damaged, modified, loose, or improperly installed weight distribution hitch hardware.
• (1) Fastway e2 Round Bar Spring Arm — 800 lb TW / 8,000 lb GTW
Fastway Trailer Products / Progress Mfg.: Website: fastwaytrailer.com/contact-us Fastway is manufactured by Progress Mfg., the same company behind Fastway and Equal-i-zer towing products.