Replacement 3/4" conical tooth washer for Fastway e2 weight distribution hitch systems. This washer is used with the shank bolt that connects the e2 hitch head assembly to the adjustable shank.
The Fastway 92-04-9645 is a replacement 3/4" conical tooth washer for Fastway e2 weight distribution hitch systems. It is used at the hitch head-to-shank connection with the e2 shank bolt hardware.
This washer is useful when the original washer is missing, damaged, flattened, worn, corroded, or being replaced during hitch head service. Conical tooth washers are load-bearing hardware and should be installed according to the Fastway e2 owner's manual.
Replacement 3/4" conical tooth washer for Fastway e2 hitch hardware
Used with the shank bolt that connects the e2 hitch head assembly to the adjustable shank
This washer is part of the e2 hitch head-to-shank hardware connection. Always follow the Fastway e2 owner's manual for proper washer orientation, bolt installation, and torque specifications before towing.
Installation Steps: 1. Park Safely: Park the tow vehicle and trailer on level ground before servicing the hitch 2. Inspect Hardware: Check the hitch head bolts, washers, and nuts for wear, corrosion, damage, or missing pieces 3. Install Washer: Place the conical tooth washer in the correct position and orientation according to the e2 owner's manual 4. Torque to Specification: Tighten the hitch head hardware to the torque value specified in the Fastway e2 owner's manual 5. Final Safety Check: Confirm the hitch head, shank, and all related hardware are secure before towing Do not tow with missing, damaged, modified, or improperly torqued weight distribution hitch hardware.
• (1) Fastway e2 3/4" Conical Tooth Washer
Fastway Trailer Products / Progress Mfg.: Website: fastwaytrailer.com/contact-us Fastway is manufactured by Progress Mfg., the same company behind Fastway and Equal-i-zer towing products.