Replacement L-bracket for Fastway e2 weight distribution hitch systems rated from 6,000 to 12,000 lbs GTW. The e2 spring arm rests on this bracket as part of the trailer-frame sway-control bracket setup.
The Fastway 93-02-5150 e2 L-Bracket is a replacement sway-control bracket component for Fastway e2 weight distribution hitch systems. It provides the resting point for the e2 spring arm at the trailer-frame bracket assembly.
This L-bracket mounts to the Fastway e2 outside link plate and is used with compatible 6K, 8K, 10K, and 12K e2 round bar and trunnion bar hitch systems. It is useful when the original L-bracket is missing, worn, bent, damaged, corroded, or being replaced during hitch service.
Replacement L-bracket for Fastway e2 sway-control bracket assemblies
Works with compatible Fastway e2 systems rated from 6,000 to 12,000 lbs GTW
Provides the trailer-frame bracket surface where the e2 spring arm rests during towing
Compatible with Fastway e2 round bar and trunnion bar hitch systems
This is a replacement Fastway e2 L-bracket for the trailer-frame sway-control bracket assembly. A complete e2 hitch setup uses one L-bracket on each side of the trailer frame. Confirm your hitch rating, bar style, link plates, L-pin, clip, and bracket hardware before towing.
Replace the L-bracket if the original bracket is missing, bent, cracked, heavily corroded, worn down, or no longer holds the spring arm correctly. Visible damage: Do not tow with a cracked, bent, distorted, or loose L-bracket. Excessive wear: Replace the bracket if the spring arm contact surface is worn enough to affect proper arm placement. Used hitch setup: This part is helpful when restoring a used Fastway e2 hitch with missing or questionable bracket hardware. Bracket service: Inspect the surrounding link plates, bolts, L-pin, and L-pin clip whenever replacing the L-bracket.
Installation Steps: 1. Park Safely: Park the tow vehicle and trailer on level ground before servicing the hitch 2. Inspect the Bracket Assembly: Check the link plates, bracket hardware, L-pin, and L-pin clip for damage or wear 3. Position the L-Bracket: Mount the replacement L-bracket to the outside link plate in the correct orientation 4. Secure Hardware: Tighten the bracket hardware according to the Fastway e2 owner's manual 5. Seat the Spring Arm: Place the e2 spring arm onto the L-bracket and secure it with the proper L-pin and clip 6. Final Safety Check: Confirm both trailer-frame bracket assemblies, spring arms, L-pins, and clips are properly installed before towing Always follow the Fastway e2 owner’s manual for your specific hitch model. Do not tow with missing, damaged, modified, loose, or improperly installed weight distribution hitch hardware.
• (1) Fastway e2 L-Bracket
Fastway Trailer Products / Progress Mfg.: Website: fastwaytrailer.com/contact-us Fastway is manufactured by Progress Mfg., the same company behind Fastway and Equal-i-zer towing products.