Replacement L-pin clip for Fastway e2 weight distribution hitch systems. This clip secures the e2 L-pin that holds the spring arm in place on the trailer-frame L-bracket.
The Fastway 92-04-9208 e2 L-Pin Clip is a small replacement clip used with the Fastway e2 L-pin. Together, the L-pin and clip help retain the spring arm on the trailer-frame L-bracket during towing.
This clip is useful when the original clip is missing, bent, worn, damaged, or corroded. It is a simple service replacement part for compatible Fastway e2 round bar and trunnion bar weight distribution hitch systems.
Replacement clip for the Fastway e2 L-pin used at the trailer L-bracket
Helps hold the L-pin in place so the spring arm stays retained on the L-bracket
Works with compatible Fastway e2 round bar and trunnion bar hitch systems
Handy replacement for a lost, bent, worn, damaged, or corroded clip
This part is a Fastway e2 weight distribution hitch L-pin clip. It is not a leveling jack clip, stabilizer jack clip, or general RV jack hardware.
Installation Steps: 1. Park Safely: Park the tow vehicle and trailer on level ground before working around the hitch 2. Position the L-Pin: Install the Fastway e2 L-pin through the L-bracket to retain the spring arm 3. Install the Clip: Slide the L-pin clip into place to secure the L-pin 4. Check Before Towing: Confirm both L-pins and clips are properly installed before travel Always follow the Fastway e2 owner’s manual for your specific hitch model. Do not tow with missing, damaged, modified, or improperly secured weight distribution hitch hardware.
• (1) Fastway e2 L-Pin Clip
Fastway Trailer Products / Progress Mfg.: Website: fastwaytrailer.com/contact-us Fastway is manufactured by Progress Mfg., the same company behind Fastway and Equal-i-zer towing products.