Complete RV flagpole kit with 22' collapsible fiberglass pole, 2" FlagPole Buddy pole holders, ladder mount hardware for compatible 1" RV ladder tubing, 3' x 5' American flag, flag clips, chrome ball top, and pole storage bag.
The FlagPole Buddy 106022XT-K is a complete fiberglass flagpole and RV ladder mount kit designed to make flying a flag easier, sturdier, and more convenient at the campsite. The included fiberglass pole extends from approximately 3.5 ft up to 22 ft and collapses for easier storage in the included pole bag.
This kit includes both the collapsible flagpole and the FlagPole Buddy mounting hardware needed to support it. The 2" upper twist holder and 2" lower cup holder are sized for the pole system, while the ladder mounting hardware is designed for compatible RV ladders with approximately 1" diameter tubing.
Includes one 3' x 5' American flag and four flag clips
Collapsible pole extends from approx. 3.5 ft to 22 ft
Upper twist and lower cup holders support the 2" pole system
Pole bag included for easier storage and transport
This is not just a ladder mount, and it is not just a flagpole. The FlagPole Buddy 106022XT-K includes the 22' fiberglass flagpole, the 2" upper and lower pole holders, the ladder mounting hardware, the 3' x 5' American flag, flag clips, hardware, chrome ball top, and pole bag.
The 2" measurement refers to the FlagPole Buddy pole holder size, including the upper twist holder and lower cup holder. The ladder mounting hardware is designed for compatible RV ladders with approximately 1" diameter ladder tubing. Before installing, confirm your ladder tube diameter, mounting location, clearance, and ladder condition. The ladder must be sturdy enough to support the flagpole setup in outdoor conditions.
The FlagPole Buddy 106022XT-K is commonly used on motorhomes, fifth wheels, travel trailers, toy haulers, campers, and RVs with compatible ladders or flat mounting surfaces. It is a popular setup for campsites, RV rallies, tailgating, holidays, sporting events, and outdoor gatherings where a taller flag display is desired.
• One 2.0" FlagPole Buddy mount set • One 2.0" diameter upper “twist” holder • One 2.0" diameter lower “cup” holder • Two mounts • Two caps • Ten Nylock nuts • Stainless steel bolts • Allen wrench • Chrome ball top • Stainless steel nut and bolt pack • Four flag clips • One 3' x 5' American flag • One fiberglass pole extending approx. 3.5 ft to 22 ft • One pole storage bag
View the FlagPole Buddy 2.0 installation instructions here: FlagPole Buddy 2.0 Instruction Manual
Optional FlagPole Buddy solar lighting accessories are available separately for customers who want to illuminate their flag display at night. Solar Beacon 106755-RWB Solar beacon accessory for compatible FlagPole Buddy setups. LED Solar Powered Saber / Flag Pole Light 106776 Solar-powered saber-style flag pole light accessory for compatible FlagPole Buddy setups.
Confirm you need the complete kit with the 22' fiberglass pole, 2" pole holders, RV ladder mount hardware, American flag, clips, chrome ball top, hardware, and storage bag. Also confirm your RV ladder tubing is approximately 1" diameter and compatible with the mounting hardware, or that you have a suitable flat mounting surface for installation.
RV ladders, mounting surfaces, and exterior wall construction can vary. The mount must be installed on a secure ladder or properly supported flat surface. Remove or lower the pole in severe weather, high winds, during travel, or whenever conditions may exceed safe flagpole use. Optional lights are sold separately and are not included with this kit.
The FlagPole Buddy 106022XT-K is a complete 22' fiberglass RV flagpole kit with 2" pole holders and ladder mount hardware for compatible 1" RV ladder tubing. It includes the collapsible fiberglass pole, mount set, upper twist holder, lower cup holder, mounts, caps, Nylock nuts, stainless steel bolts, Allen wrench, chrome ball top, stainless steel nut/bolt pack, four flag clips, 3' x 5' American flag, and pole bag. Optional lighting accessories, including Solar Beacon 106755-RWB and LED Solar Powered Saber / Flag Pole Light 106776, are sold separately. Review the installation manual and verify kit contents, pole size, ladder tubing diameter, mounting surface strength, travel storage, wind conditions, and accessory compatibility before ordering.