The Furrion FS65W brings full-range audio back to your RV interior with a clean, recessed wall mount profile. Rated at 30 watts max with a 4-ohm impedance, it pairs with most RV head units and stereos straight out of the box. Whether you're replacing a blown factory speaker or upgrading a tired system, this is a direct bolt-on solution with a standard 6-inch cutout footprint.
Factory RV speakers are often undersized and underpowered -- they check the box at the assembly line but rarely deliver satisfying audio for music, movies, or TV. The Furrion FS65W is a purpose-built replacement designed for the space and power constraints of RV interiors. The 6.5-inch woofer handles bass duties while the full-range driver covers mids and highs, so you won't need a separate tweeter array to get clear, balanced playback.
The sturdy metal housing resists the vibration and flex common in RV walls and slide-out cabinetry. A white grille and trim ring give it a finished, factory appearance that suits most modern RV interiors. Installation is straightforward: match the 6-inch cutout diameter and 5-3/4-inch mounting hole spacing, connect your speaker wire leads, and bolt it in place.
Single driver covers 60 Hz to 20 kHz -- bass, mids, and highs without a separate tweeter.
Rigid metal construction handles road vibration better than plastic-shell speakers.
Standard 6-inch cutout and 5-3/4-inch hole spacing -- drops into most existing RV speaker openings.
Compatible with virtually all RV stereo receivers and head units without an impedance adapter.
The FS65W is designed for recessed wall mounting in RV interior walls, slide-out panels, and cabinetry. Before purchasing, confirm your existing cutout matches the 6-inch diameter and that your wall depth accommodates the 1-3/8-inch cutout depth. The overall speaker body extends 2 inches behind the wall surface, so verify clearance behind the mounting panel before cutting a new opening.
Mounting hardware is bolt-on style. Secure the speaker using the integrated mounting flange with the 5-3/4-inch center-to-center hole spacing. Connect the speaker wire leads observing polarity (positive/negative) to match your other speakers for proper stereo phase.
At 4 ohms and 30 watts max power handling, the FS65W pairs comfortably with standard RV receivers in the 15-25 watt RMS per channel range. Running a higher-powered external amplifier is possible but keep peak output under 30 watts to protect the driver. Sensitivity is rated at 86 dB (1W/1m), which is efficient enough for clear playback at moderate volumes without taxing a factory head unit.