Home > Electrical > Generator Parts & Accessories >

Onan 155-2174 Generator Exhaust Tail Pipe Hanger With Clamp For 1-1/2" OD Exhaust Pipes

Onan 155-2174 Generator Exhaust Tail Pipe Hanger With Clamp For 1-1/2" OD Exhaust Pipes
Onan Generator Exhaust Tail Pipe Hanger With Clamp For 1-1/2" OD Exhaust Pipes
 
List Price: $38.59
: $27.49
You save $11.10!
Part Number: 155-2174
Manufacturer: Cummins Onan

Quantity in Stock :38

Availability: In Stock
Qty:

 
Cummins Onan 155-2174 Exhaust Tailpipe Hanger with Clamp - 1-1/2" O.D.

Cummins Onan 155-2174 Exhaust Tailpipe Hanger with Clamp — 1-1/2" O.D. Exhaust Pipes

Genuine OEM tailpipe hanger with flexible bracket and clamp for 1-1/2" O.D. Cummins Onan RV generator exhaust systems. 6-1/2" length. 1-year limited warranty.

Tailpipe Hanger for 1-1/2" O.D. Onan RV Generator Exhaust Systems

The Cummins Onan 155-2174 is the OEM exhaust tailpipe hanger for Cummins Onan RV generators using the 1-1/2" outer diameter exhaust system — the QG 5500/6500/7000 (HGJAA, HGJAB, HGJAC) and Quiet Diesel QD Series families. It supports the tailpipe end and at intermediate points along longer runs, as required by the Onan installation manual.

The flexible bracket segment absorbs vibration between the tailpipe and the RV frame attachment point, reducing rigid stress on the pipe joints and fittings. The clamp is included — no separate hardware required for installation.

🔩 Flexible Bracket Segment

Built-in flexibility absorbs vibration and reduces rigid tailpipe stress at mounting points — extends the service life of pipe joints and fittings

📦 Clamp Included

Pipe clamp included in the kit — everything needed to mount the hanger to the tailpipe in a single purchase

📏 6-1/2" Length

Sized to provide adequate reach from the RV frame or floor structure down to the 1-1/2" O.D. tailpipe run below

🏭 Genuine Cummins OEM

Tested and designed specifically for RV generator exhaust applications — OEM parts maintain system integrity and preserve Cummins Onan warranty coverage

⚠️ For 1-1/2" O.D. Exhaust Systems Only

The 155-2174 fits 1-1/2" outer diameter exhaust pipe — the system used on QG 5500/7000 (HGJAA/HGJAB/HGJAC) and QD Series generators. Older Onan families including BGE, NHE, KV, and NH RV use a 1-1/4" O.D. exhaust system and require a different hanger. Confirm your generator's exhaust pipe diameter before ordering.

Specifications

Part Number155-2174 (also listed as 0155-2174)
BrandCummins Onan
Part TypeExhaust Tailpipe Hanger with Clamp
Pipe O.D.1-1/2"
Length6-1/2"
Bracket TypeFlexible segment
IncludesHanger and clamp
Compatible Systems1-1/2" O.D. (QG 5500/7000 HGJAA/HGJAB/HGJAC; QD Series)
Weight0.85 lbs
Warranty1-Year Limited

✅ Related Exhaust Hardware

155-1015 — 1-1/2" loop-style muffler/tailpipe clamp
155-3481-01 — 22" tailpipe kit (HGJAB/HGJAC, includes hanger)
155-3481-02 — 26" tailpipe kit (HGJAB/HGJAC, includes hanger)
046-series — 1-1/2" O.D. tailpipe pipes (various drop/run lengths)

📋 Warranty Information

Backed by a 1-year limited manufacturer's warranty. Purchased parts are warranted for one year from date of purchase, or any parts repaired or replaced during the equipment warranty period assume the remainder of that warranty, whichever is greater.



Browse for more RV Accessories in the same category as this item:

Electrical > Generator Parts & Accessories
Electrical


$357.99
$195.49
$58.99
$77.99