Home > Appliances > RV Water Heater Parts >

Lippert Girard 2GWH-24 Replacement Water Flow Sensor for Girard RV Tankless Water Heaters -- Part 2022107584

Lippert Girard 2GWH-24 brass water flow sensor replacement for Girard RV tankless water heaters, part number 2022107584
Girard Water Flow Sensor for Girard RV Tankless Water Heaters
 
Alternative Views:


List Price: $70.89
: $54.49
You save $16.40!
Part Number: 2022107584
Manufacturer: Lippert

Quantity in Stock :34

Availability: In Stock
Qty:

 
Lippert / Girard Part 2022107584 Ref 2GWH-24 Girard 2GWH-24 Replacement Water Flow Sensor for Girard RV Tankless Water Heaters

When your Girard tankless water heater stops igniting on demand, a failed or stuck water flow sensor is one of the most common culprits. This genuine Lippert replacement sensor -- reference number 2GWH-24, Lippert part 2022107584 -- restores the flow-detection signal your heater needs to fire the burner the moment you open a hot water tap.

Restore On-Demand Hot Water in Your RV

Girard tankless water heaters use a flow sensor to detect water movement through the unit and trigger the ignition sequence. Over time, mineral deposits, debris, or internal wear can cause the sensor to fail, resulting in no hot water, delayed ignition, or error codes at the control panel. Replacing the flow sensor is typically a straightforward repair that gets your system back to full operation without replacing the entire heater.

This brass-bodied sensor is the factory-specified replacement for compatible Girard tankless heater models that reference sensor number 2GWH-24. Using the correct OEM-spec component ensures the flow threshold and signal output match your heater's control board expectations.

Brass Construction

Durable brass body resists corrosion and handles the water pressure demands of RV on-demand heating systems.

OEM Reference 2GWH-24

Exact Girard sensor reference number ensures correct fit and compatible signal output for your heater's control board.

Demand-Activated Ignition

Signals the burner to fire only when water is flowing -- restoring the tankless heater's core on-demand function.

Direct Replacement Part

Lippert part 2022107584 replaces the original sensor in applicable Girard heater models with no modification required.

Common Symptoms of a Failed Flow Sensor

  • Tankless heater does not ignite when hot water tap is opened
  • Unit fires briefly then shuts off unexpectedly
  • Control panel displays a flow-related fault or error code
  • Hot water only works intermittently or after multiple attempts
  • Heater worked previously but stopped after sitting unused or in freezing temps

Fitment Notes -- Confirm Before Ordering

This sensor is designed for Girard RV tankless water heater models that specifically list sensor reference 2GWH-24 in their parts documentation. Girard produces multiple tankless heater generations (including the GSWH-1 and GSWH-2 series) and not all models use the same flow sensor. Check your heater's model number and existing sensor reference number before purchasing to confirm compatibility. The Girard GSWH-2 series is the most common application for the 2GWH-24 sensor.

About Girard and Lippert

Girard Products is the manufacturer of the popular line of Girard RV tankless water heaters and awning systems. Lippert Components acquired Girard and is the current source for genuine Girard replacement parts. When ordering Girard parts through Lippert or authorized dealers, Lippert part numbers (such as 2022107584) correspond directly to original Girard reference numbers (such as 2GWH-24). Both numbers refer to the same component.

Installation Tips

  • Turn off the water supply and relieve line pressure before removing the old sensor.
  • Use thread-seal tape (PTFE) on the sensor threads to prevent leaks at the connection point.
  • Do not overtighten -- brass fittings can crack if forced. Snug plus approximately 1/4 turn with a wrench is typically sufficient.
  • After installation, restore water pressure and check for leaks before restoring propane and power to the heater.
  • Clear any stored fault codes at the control panel after replacement and test with a full flow of hot water.

Part Identification

ManufacturerLippert Components (Girard Products)
Lippert Part Number2022107584
Girard Sensor Reference2GWH-24
Vendor / Dealer Part11-9151
UPC846611000936

Component Specifications

Component TypeWater flow sensor
Body MaterialBrass
FunctionDetects water flow to trigger tankless heater ignition sequence
Signal TypeDemand-activated (flow-triggered)

Compatible Application

Heater BrandGirard (by Lippert)
Heater TypeRV tankless (on-demand) propane water heaters
Primary SeriesGirard GSWH-2 and compatible models referencing sensor 2GWH-24
Confirm Fitment ByMatching sensor reference number 2GWH-24 on your existing unit or parts list

What Is Included

Included1x Girard 2GWH-24 water flow sensor (Lippert 2022107584)
Not IncludedThread-seal tape, tools, wiring connectors, or other hardware

Important Information

  • Confirm sensor reference number 2GWH-24 on your existing heater or parts documentation before ordering. Not all Girard tankless heater models use this sensor.
  • Turn off water supply and LP gas and disconnect shore power or battery before beginning any repair on the water heater.
  • Propane appliance repair -- if you are not comfortable working on LP gas appliances, have a qualified RV technician perform this replacement.
  • Check for leaks after installation before returning the heater to service. A missed leak at the sensor fitting can cause water damage inside the heater compartment.
  • This is a replacement part only -- it does not include any heater components, control boards, or wiring harnesses.


Browse for more RV Accessories in the same category as this item:

Appliances > RV Water Heater Parts
Appliances