A reliable, code-compliant pigtail hose built to connect your RV propane regulator or appliance to a standard POL cylinder valve. Short enough for tight compartments, engineered to the same specs OEM RV builders use on the production line.
The JR Products 06-0124 is a 12-inch rubber LP gas pigtail hose used to connect an RV two-stage or single-stage propane regulator to a portable or onboard propane cylinder with a standard POL (Prest-O-Lite) valve. It is the same style of short connector hose found on the production line of many RV manufacturers -- hence the "OEM" designation -- making it a direct, drop-in replacement for worn, cracked, or leaking factory hoses.
One end terminates in a 1/4-inch male inverted flare fitting, which threads into the inlet port of most RV propane regulators and many appliance-side fittings. The opposite end is a POL left-hand-thread fitting that screws directly onto the service valve of a standard 20 lb., 30 lb., or 40 lb. propane cylinder. No adapters are needed for this common configuration.
1/4" ID LP-rated rubber construction -- the same spec used by major RV assemblers. Flexible enough for tight propane compartment routing.
Left-hand-thread POL end connects directly to standard propane cylinder service valves. No adapter required for typical 20-40 lb. cylinders.
Regulator-side fitting matches the 1/4" inverted flare inlet on most RV two-stage and single-stage LP regulators.
Certified to UL and CSA standards for LP gas service, meeting the safety requirements of most RV parks, campgrounds, and inspections.