Home > Lippert Repair Parts > Electric and Hydraulic Slide-Out Parts >

Lippert 239114 J-32 Slide-Out Roller Assembly for Electric Single Rail Above-Floor RV Slide-Outs
Lippert 239114 J-32 Slide-Out Roller Assembly with open-center black bracket and nylon roller for electric single rail above-floor RV slide-out systems.
Lippert J-32 Slide-Out Roller Assembly
  
Alternative Views:
: $28.90
Part Number: 239114
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :

Availability: Out of Stock
Qty:

 
Lippert Part 239114 Electric Single Rail Slide-Out Lippert J-32 Slide-Out Roller Assembly -- 239114

A direct-replacement roller assembly for Lippert electric single rail above-floor RV slide-out systems. Engineered to maintain smooth, consistent slide room travel and reduce wear on the slide rail. Open-center mounting plate design simplifies installation and replacement on a wide range of coach brands including Keystone and Winnebago models.

Keep Your Slide Moving Smoothly

The Lippert J-32 roller assembly (part 239114) supports and guides the slide room as it extends and retracts along the single rail track. Over time, nylon rollers wear flat, crack, or seize, causing binding, uneven travel, and accelerated wear on the slide rail itself. Replacing a worn roller assembly early prevents far more costly repairs to the rail, motor, or room seal.

This assembly includes the black bracket, pin, nylon roller, and hat cap pushnut -- everything needed to complete the roller replacement. The open-center mounting plate allows access to fasteners without full disassembly of the slide mechanism.

Open-Center Bracket

The mounting plate is open in the center, making it easier to access hardware and complete installation without removing the entire slide assembly.

Nylon Roller

The 1" OD x 0.33" ID x 3.63" wide nylon roller provides low-friction support along the rail for quiet, consistent slide-room operation.

Complete Assembly

Includes the bracket, pin, nylon roller, and 5/16" hat cap pushnut -- all components needed for a full roller replacement in one kit.

Multi-Brand Fitment

Cross-references Keystone RV part 336096 and Winnebago part 20148402000, making it a confirmed replacement for a wide range of popular coach models.

Fitment and Compatibility

This roller assembly is designed for Lippert electric single rail above-floor slide-out systems. The single rail above-floor design is common on Class A motorhomes, fifth wheels, and travel trailers from the mid-2000s through current production where the slide room rides on a single horizontal rail and the rollers are accessible from below or behind the room.

  • Lippert OEM part number: 239114
  • Keystone RV cross-reference: 336096
  • Winnebago cross-reference: 20148402000
  • Designed for electric single rail above-floor slide-out configurations
  • Not intended for under-floor, rack-and-pinion, or hydraulic slide systems
Genuine Lippert OEM Part -- Part number 239114 is a factory Lippert component, ensuring correct dimensions, materials, and fitment for your slide system. Using OEM rollers maintains original performance specifications and protects your warranty on other slide components.

Installation Notes

Replacing slide-out rollers is a manageable DIY repair for RV owners comfortable working underneath or inside their slide room. A few tips before you start:

  • Retract the slide fully before beginning any roller work.
  • Disconnect shore power and disable the slide switch to prevent accidental activation during service.
  • The hat cap pushnut (5/16") secures the pin -- have a removal tool or small pry tool ready to pop the old pushnut without damaging the bracket.
  • Inspect the slide rail for wear grooves or burrs while the roller is out; a damaged rail will quickly wear a new roller.
  • Lubricate the new roller pin lightly with white lithium grease before reassembly.
Maintenance Tip: Inspect slide-out rollers at least once per season, or any time you notice the slide room hesitating, binding, or producing a grinding or clunking sound during travel. Catching a worn roller early prevents rail damage that requires more extensive repairs.
What's Included: One complete J-32 roller assembly -- black mounting bracket, roller pin, nylon roller (1" OD x 0.33" ID x 3.63" W), and one 5/16" hat cap pushnut. No additional hardware required for standard replacement.

Component Dimensions

Overall Bracket (W x L x H)1.75" x 4" x 1.05"
Bracket Color / MaterialBlack powder-coated steel
Mounting Plate StyleOpen center

Roller Specifications

Nylon Roller OD1.00"
Nylon Roller ID0.33"
Nylon Roller Width3.63"
Roller MaterialNylon

Pin and Hardware

Pin Width4.63"
Pin Diameter0.31" (approx. 5/16")
Hat Cap Pushnut Size5/16"

Part Number Cross-Reference

Lippert Part Number239114
Keystone RV Part336096
Winnebago Part20148402000

General Information

ApplicationElectric single rail above-floor slide-out
Assembly Weight5 lbs.
WarrantyLimited 1-year manufacturer warranty
BrandLippert Components (LCI)
Important Information
  • This roller assembly is designed specifically for Lippert electric single rail above-floor slide-out systems only. Verify your slide type before ordering.
  • Not compatible with under-floor slide systems, rack-and-pinion systems, or hydraulic slide-out mechanisms.
  • Always retract the slide fully and disable power to the slide system before performing any roller inspection or replacement work.
  • Inspect the slide rail for wear or damage whenever replacing a roller -- a worn rail will prematurely damage a new roller assembly.
  • Weight listed (5 lbs.) reflects the complete assembly as shipped.
  • Confirm your coach's OEM part number (Keystone 336096 or Winnebago 20148402000) or the Lippert number 239114 before purchase to ensure correct fitment.

ACCESSORIES
Lippert 276288 J-36 Slide-Out Service Roller Assembly for LCI In-Wall Slide Systems Lippert 244838 J-33 Slide-Out Roller Assembly -- 1" OD Roller, In-Wall Slide System Replacement Lippert 115612 J-2 Slide-Out Roller Assembly for Electric Single Rail Above Floor Systems Lippert 115622 J-13 RV Slide-Out Roller Assembly -- Electric Single Rail Above Floor System
: $31.49

Add
: $24.36

Add
: $36.25

Add
: $27.40

Add
Lippert 276288 J-36 Slide-Out Service Roller Assembly for LCI In-Wall RV Slide Systems, 4-11/16 inch length Lippert 244838 J-33 Slide-Out Roller Assembly with 1-inch OD roller and 1-3/4 by 4 inch mounting plate for in-wall RV slide-out systems. Lippert 115612 J-2 Slide-Out Roller Assembly for electric single rail above floor RV slide-out systems, 5.19 x 4.20 x 1.45 inches Lippert 115622 J-13 RV slide-out roller assembly with nylon roller on steel base plate, for electric single rail above floor slide-out systems.


Browse for more RV Accessories in the same category as this item:

Lippert Repair Parts > Electric and Hydraulic Slide-Out Parts
Lippert Repair Parts