Home > Jacks & Levelers >

Lippert PowerGear Hall Effect Sensor 383490 -- Replacement for Electric Leveling Jacks (45-0023)

Lippert 383490 PowerGear Hall Effect Sensor replacement harness for Power Gear electric leveling jacks, part 45-0023
Lippert 383490 PowerGear Hall Effect Sensor
 
List Price: $126.59
: $98.49
You save $28.10!
Part Number: 383490
Manufacturer: Lippert

Quantity in Stock :13

Availability: In Stock
Qty:

 
Lippert Part 383490 1-Year Warranty Lippert PowerGear Hall Effect Sensor -- OEM Replacement for Electric Leveling Jacks

When your Power Gear electric leveling system stops reading jack position accurately, the hall effect sensor is often the culprit. The Lippert 383490 is the factory-correct replacement harness, restoring reliable position feedback so your leveling system operates the way it was designed to.

Accurate Jack Position Sensing -- Restored

The hall effect sensor in a Power Gear electric leveling system monitors the rotational position of the jack motor or drive mechanism using a magnetic field rather than physical contact. This non-contact design reduces wear, but when the sensor or its harness fails, the control board loses position data -- resulting in jacks that won't retract fully, error codes on the control panel, or a system that refuses to cycle at all.

Lippert part 383490 is the direct OEM-style replacement harness for this sensor, designed to plug in exactly where the original did with no splicing or modification required. Replacing a faulty sensor harness is one of the most cost-effective repairs in the PowerGear leveling system, and this part is the correct starting point when diagnosing position-related faults.

Non-Contact Sensing

Hall effect technology reads jack position magnetically with no mechanical wear on sensing components.

Direct Fit Replacement

Designed as a drop-in harness for Power Gear electric leveling jack systems -- no splicing required.

Harness Included

Complete sensor harness assembly. Restores the wiring connection between the sensor and the leveling control board.

1-Year Warranty

Backed by a limited 1-year manufacturer warranty from Lippert Components.

What a Hall Effect Sensor Does in Your Leveling System

Power Gear electric leveling jacks use hall effect sensors to tell the control module exactly how far each jack has extended or retracted. The sensor detects pulses from a rotating magnet on the motor or lead screw, and the controller counts those pulses to track position. If the sensor harness is damaged, corroded, or has a broken wire, the count is lost -- and the system either faults out or behaves erratically.

Common symptoms of a failed hall effect sensor or harness include:

  • Control panel error codes related to jack position or travel limit
  • One or more jacks refusing to retract fully or extend to level
  • Jacks cycling but the system reporting them as not fully retracted
  • Auto-leveling routine that runs briefly and then stops with a fault
  • Visible damage, corrosion, or a pinched wire on the existing sensor harness
Diagnostic Tip: Before replacing the sensor, inspect the harness connector for corrosion and the wiring for chafing against the jack body or chassis. A damaged harness is frequently the root cause of hall effect sensor faults in road-exposed applications.

Compatible Leveling Systems

This sensor harness is compatible with Power Gear electric leveling jack systems as found on a wide range of fifth wheels, travel trailers, and motorhomes from manufacturers including Coachmen, Forest River, Keystone, Heartland, and others that specified Power Gear (now Lippert) electric leveling from the factory.

Verify Before Ordering: Power Gear and Lippert have produced several generations of electric leveling systems. Confirm your system's control box part number or check the jack assembly label to verify this sensor harness matches your specific system generation before installation.

What Is -- and Is Not -- Included

  • Included: Hall effect sensor harness assembly (part 383490)
  • Not included: Mounting hardware, control module, jack motor, or any other leveling system components
Installation Note: Disconnect shore power and switch off the leveling system at the control panel before replacing the sensor harness. Route the replacement harness away from moving jack components and secure with zip ties to prevent road abrasion.

Part Identification

ManufacturerLippert Components (Power Gear)
Part Number383490
SKU / MPN45-0023
UPC848150046406

Product Details

Product TypeHall Effect Sensor Harness
System CompatibilityPower Gear electric leveling jacks
Harness OnlyYes -- sensor harness assembly, no additional components
Sensing MethodHall effect (non-contact magnetic position sensing)

Warranty

Warranty Period1 year limited manufacturer warranty
Warranty ProviderLippert Components

Application

Vehicle TypeRV -- fifth wheels, travel trailers, motorhomes
SystemElectric leveling jack (Power Gear / Lippert)
FunctionJack motor position feedback to leveling control module
Important Information
  • This listing is for the sensor harness assembly only -- no control module, jack, motor, or mounting hardware is included.
  • Always disconnect power from the leveling system before removing or installing sensor harnesses.
  • Confirm compatibility with your specific Power Gear or Lippert leveling system generation using your control box part number before installation.
  • Route and secure the harness away from all moving jack components to prevent damage from road vibration and debris.
  • Lippert's 1-year limited warranty covers manufacturer defects -- physical damage from improper installation or road debris is not typically covered.

ACCESSORIES
RV Designer Stick On Level For RVs - 2 Pack AP Products Super Jack Pads - Set Of 4 Camco 44543 Large Stabilizer Jack Pad - Set of 2 with Handle Valterra Stackers EZ Leveler Jack Pads - 10 Pack
: $10.99

Add
: $53.49

Add
: $26.43

Add
: $50.99

Add
RV Designer E401 Stick On Level For RVs - 2 Pack AP Products 007-47257 Super Jack Pads - Set Of 4 Camco 44543 Large Stabilizer Jack Pad - Set of 2 with Handle Valterra A10-0918 Stackers EZ Leveler Jack Pads - 10 Pack
Camco Stabilizer Jack Pads - 4 Pack Camco Universal Flex Pads for Leveling Blocks - 8.5" x 8.5" - 2 Pack Wheel Masters Level Master II RV Bubble Level Camco Stabilizer Jack Pads - Rubber - 4 Pack
: $23.49

Add
: $45.49

Add
: $26.99

Add
: $29.99

Add
Camco 44595 Stabilizer Jack Pads - 4 Pack Camco 44600 Universal Flex Pads for Leveling Blocks - 8.5" x 8.5" - 2 Pack Wheel Masters 67200 Level Master II RV Bubble Level Camco 44591 Stabilizer Jack Pads - Rubber - 4 Pack
Camco Standard RV Level - 2 Pack
: $4.49

Add
Camco 25523 Standard RV Level - 2 Pack


Browse for more RV Accessories in the same category as this item:

Jacks & Levelers
Lippert Components
Lippert Repair Parts


$35.49
$107.18
$54.49
$50.49