A direct-replacement idler hub assembly for light trailer axles rated at 2,200 lbs. The Lippert 814207 ships ready to install -- solid iron construction with the full bearing cone kit already included so you are not hunting down separate components at the parts counter.
When a trailer hub wears out or a bearing fails, you need a replacement that matches the original bolt pattern, stud size, and bearing stack exactly. The Lippert 814207 is engineered for 2,200 lb trailer axles using the common 5 on 4.5 inch (5x4.5 in.) bolt circle -- the same pattern found on a wide range of Lippert-equipped travel trailers, toy haulers, and utility trailers built around 13 to 15 inch wheels.
Unlike bare hub castings that require a separate trip for bearings, this kit bundles the inner and outer bearing cones, matching bearing cups, a double-lip grease seal, and a cotter pin into one box. The solid iron hub flange is machined to accept standard 1/2 inch wheel studs and seats the bearing stack to OEM tolerances.
Heavy-duty iron casting resists deformation under load and provides consistent bearing seat geometry over the service life of the axle.
Inner and outer bearing cones, inner and outer bearing cups, double-lip grease seal, and cotter pin ship in the box -- no separate sourcing required.
Matches the bolt pattern used on the majority of 2,200 lb Lippert trailer axles. Compatible with 13 to 15 inch wheels running 1/2 inch studs.
Backed by Lippert's limited 1-year manufacturer warranty against defects in materials and workmanship.
An idler hub is the non-braking wheel hub used on trailer axles that do not have drum brake assemblies. It houses the inner and outer wheel bearings, retains the bearing grease behind a lip seal, and transfers the wheel load to the spindle. On a typical tandem-axle travel trailer, the front axle may be the idler (non-braked) axle, while the rear axle carries electric drum brakes. Always confirm whether your axle position requires an idler hub or a brake hub before ordering.
The 814207 is designed for Lippert trailer axles rated at 2,200 lbs with a 5 on 4.5 inch bolt pattern. Verify the following before ordering: