Upgrade your RV entry door to three-way access control -- Bluetooth via the OneControl app, a programmable keypad, and a traditional keyed backup -- without running a single wire. The Lippert 2022114114 is a direct retrofit for standard RV entry door cutouts, finished in black powder-coated aluminum for a clean, durable look that holds up on the road.
The Lippert Bluetooth keyless lock gives you and your travel companions real flexibility at the door. Walk up with your phone and the proximity sensor unlocks automatically within 60 feet. Punch in your keycode on the illuminated pad when your phone is inside. Or reach for one of the two included keys when batteries run low or a guest needs access without the app.
The lock pairs with up to 6 smartphones simultaneously, so every member of your group can have independent Bluetooth access -- and if you own more than one Lippert Bluetooth lock, all of them are managed from the same OneControl app interface. Alsentis HSS touch-sensor technology drives the keypad, giving it a more responsive feel than traditional mechanical buttons.
Proximity-sensing auto-unlock and remote lock/unlock through the OneControl app at up to 60 feet from the door.
Runs entirely on 4 AA batteries (included). Installs into any standard RV entry door cutout with supplied mounting hardware.
Up to 6 smartphones can be paired to a single lock. Multiple locks can be controlled from one OneControl app account.
Backlit pad lights up at night. LED indicators confirm entry (green), flag errors (red), and warn of low battery (yellow).
The OneControl app is available on both the Google Play Store (Android) and Apple App Store (iOS). Once paired, the lock uses proximity sensors to register your phone's location and can lock or unlock the door remotely from within Bluetooth range. You can also check lock status, manage paired devices, and switch battery modes directly in the app -- no hub or Wi-Fi bridge required for basic operation.
The 2022114114 is designed to replace existing latches on standard RV entry doors without cutting new holes or pulling wire. As long as your door has a 2-3/4" x 3-3/4" face-bore cutout and measures between 1-3/8" and 1-1/2" thick, this lock drops in with the included mounting hardware. Installation is a straightforward mechanical swap suitable for a DIY install in an afternoon.
This listing is for the left-hand (LH) configuration. Left-hand means the hinge is on the right side of the door as viewed from outside and the handle/latch is on the left. Measure your existing door hardware orientation before ordering to confirm you need LH. A right-hand version is available separately.
The lock provides an audible beep confirmation every time it successfully locks or unlocks, so you know the action completed without looking at your phone. The LED indicator system on the keypad gives at-a-glance status: green for successful code entry, red for an incorrect code or error, and yellow when batteries are getting low and need replacement.
Lippert recommends Energizer or Energizer Lithium AA batteries for optimal performance and battery life, particularly in cold weather camping conditions where standard alkaline batteries lose capacity faster. Replace all 4 batteries at the same time and avoid mixing brands or charge levels.
Download the OneControl app from the Google Play Store or Apple App Store before installation. The app is free and supports multiple Lippert Bluetooth locks under one account, making it useful if your rig has a storage compartment lock or secondary door lock also in the Lippert lineup.