Adds a sturdy handrail to your Gen 2 StepAbove 3-step RV entry system. Bolts directly to existing pre-drilled holes — no new drilling required. Folds with the step for travel and storage. Requires 33" of doorway clearance.
RV entry steps are steeper than household stairs, often wet from rain or dew, and used when carrying gear or groceries — all conditions that make a handrail not just convenient but genuinely important for safety. Many RVs include a small grab handle near the door, but these are typically too high to be useful from the bottom step and awkward to reach mid-climb. The MORryde STP214-121H is a purpose-designed handrail that spans the full height of the step system, providing a secure grip at the right position for every step in and out of the RV.
The STP214-121H is specifically engineered for the Gen 2 StepAbove 3-step system and bolts directly to the pre-existing holes in those steps — no drilling, no modifications, no guesswork. Four bolts attach the handrail to the step at the factory bolt pattern (4.5" top spacing, 1.375" bottom spacing), and the integrated folding mechanism means the handrail folds neatly with the step into the doorway when traveling, staying attached without any removal or storage hassle. Built from steel with a durable black powder-coat finish and proudly made in the USA by MORryde.
Attaches to the pre-drilled bolt holes already in your Gen 2 StepAbove 3-step system — no drilling required
Integrated folding design — the handrail stays attached and folds into the doorway with the step during travel
Durable steel construction with weather-resistant black powder-coat finish — built for years of outdoor RV use
Manufactured by MORryde in Elkhart, Indiana — the same quality and origin as the StepAbove system itself
The STP214-121H fits only the Gen 2 StepAbove 3-step system. It will not fit Gen 1 StepAbove steps or any other step system. Before ordering, verify your bolt pattern: STP214-121H (This Product) — Gen 2, 3-Step: Top hole spacing: 4.5" | Bottom hole spacing: 1.375" Other handrail models for reference: • STP214-120H — Gen 2, 4-Step: Top 6", Bottom 4.5" • STP214-029H — Gen 1, 3-Step: Top 5", Bottom single bolt • STP214-006H — Gen 1, 4-Step: Top 5", Bottom 5" Measure the spacing between the bolt holes on your existing steps before ordering — the correct spacing is the definitive way to confirm compatibility regardless of what generation label your steps carry.
The STP214-121H handrail stays attached to the step and folds into the RV entrance doorway during travel. A minimum of 33" of clearance inside the doorway is required for the handrail to fold in and allow the steps to stow properly. Measure the clear width of your RV's entrance doorway before purchasing. If your doorway is narrower than 33", the handrail will not be able to fold into the stored position with the step and will interfere with closing the door.
Before You Begin: • Confirm your steps are Gen 2 StepAbove 3-step (verify bolt pattern: 4.5" top, 1.375" bottom) • Confirm 33" of doorway clearance for folded storage Installation Steps: 1. Position the Handrail: Align the handrail's mounting holes with the pre-existing holes on the left side of the Gen 2 StepAbove step assembly 2. Insert and Tighten Bolts: Insert the 4 included bolts through the handrail and into the matching step holes — tighten securely 3. Test the Fold: Deploy and retract the steps to confirm the handrail folds cleanly into the doorway and clears the door frame 4. Verify Stability: Confirm the handrail is securely attached and stable before use Refer to MORryde's included installation instructions for complete torque specifications and safety guidance. Contact MORryde at (574) 293-1581 with installation questions.
In The Package: • (1) STP214-121H Handrail Assembly • Mounting Hardware (4 Bolts) • Installation Instructions NOT Included: • Gen 2 StepAbove 3-step system (required — sold separately)
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV entry, safety, and suspension products.
Verify your step generation and bolt pattern before ordering. The bolt pattern is the definitive compatibility check.
Measure the bolt hole spacing on your existing steps before ordering. Contact MORryde at (574) 293-1581 if you are unsure which model your steps are.