Home > Sanitation > RV Toilet Repair Parts >

Lippert 2022121976 Flow Max RV Toilet Replacement Valve Kit -- 1/2" NPT Inlet

Lippert 2022121976 Flow Max RV Toilet Replacement Valve Kit with 1/2-inch NPT inlet fitting and outlet hose connection
Lippert 2022121976 Flow Max Replacement RV Toilet Valve Kit
 
Alternative Views:


: $14.02
Part Number: 2022121976
Manufacturer: Lippert
UPC #: 848150055545
NOTE: Ships in 5 to 7 days


Availability: In Stock
Qty:

 
Lippert Flow Max Series 1-Year Warranty Lippert 2022121976 Flow Max RV Toilet Replacement Valve Kit

Stop wrestling with a sluggish or leaking flush. The Lippert 2022121976 is the genuine OEM replacement valve kit for Flow Max RV toilets, restoring proper flush pressure and seal integrity without replacing the entire toilet. It fits any RV toilet using a 1/2" NPT water inlet and a 1/2" outlet hose or grommet connection -- making it one of the most widely compatible valve repair kits in the Flow Max lineup.

Genuine Lippert Valve Repair for Flow Max Toilets

The flush valve is one of the highest-wear components on any RV toilet. Over time, the internal seal degrades from mineral deposits, prolonged dry storage, or normal cycling -- leading to weak flushes, phantom running, or slow drips into the bowl. Swapping the valve kit is a straightforward DIY repair that restores like-new performance without the cost or hassle of a full toilet replacement.

Lippert part number 2022121976 is the correct service part for Flow Max toilets with the standard 1/2" NPT water supply connection. At only 0.05 lbs., the kit is compact and easy to handle in the tight confines of an RV bathroom.

OEM Fitment

Designed and sourced by Lippert specifically for Flow Max RV toilets. No trimming, adapting, or improvising required.

Standard Connections

1/2" NPT water inlet and 1/2" outlet hose or grommet -- the most common configuration in Flow Max installations.

Lightweight Design

Weighs just 0.05 lbs. Easy to stock as a spare part for extended trips or full-time RV living.

1-Year Warranty

Backed by Lippert's limited 1-year manufacturer warranty for defects in materials and workmanship.

Who This Part Is For

This valve kit is the right choice if your Flow Max RV toilet is experiencing any of the following:

  • Weak or incomplete flush cycle
  • Water trickling into the bowl between flushes
  • Valve that does not fully open or close
  • Visible wear, cracking, or mineral buildup on the existing valve

It is also a smart spare to carry if you full-time or take extended boondocking trips where finding a repair shop is not practical.

DIY-Friendly Repair: Most Flow Max valve replacements can be completed with basic hand tools. Shut off the water supply line, flush the toilet to depressurize, disconnect the inlet and outlet connections, swap the valve, and reconnect. No soldering or specialized skills required.

Compatibility and Fitment

This kit is confirmed to fit RV toilets meeting both of these criteria:

  • Uses a 1/2" NPT water supply inlet connection
  • Uses a 1/2" outlet hose or grommet discharge connection

These are the standard plumbing connections used across the Lippert Flow Max toilet family. If you are unsure of your current inlet size, check the water supply line fitting where it connects to the toilet base -- a standard 1/2" NPT fitting is the most common size found in residential-style RV toilet installations.

Note on Other Flow Max Variants: Lippert offers several Flow Max toilet models. If your toilet uses a different inlet size or a push-button actuator-style valve assembly, verify your existing valve configuration before ordering to ensure 2022121976 is the correct service part for your specific unit.
Maintenance Tip: After installation, turn the water supply on slowly and cycle the flush pedal several times to check for leaks at both the inlet and outlet connections. Snug any fittings as needed. Inspect the new valve after the first 48 hours of use to confirm no seepage.

Part Identification

ManufacturerLippert
Part Number2022121976
UPC848150055545
Product LineFlow Max RV Toilet Series
WarrantyLimited 1-Year Manufacturer Warranty

Physical Specifications

Weight0.05 lbs.
Inlet Thread Size1/2" NPT
Outlet Connection1/2" hose or grommet

Compatibility

Fits Toilet TypeLippert Flow Max RV Toilets
Required Inlet Size1/2" NPT water supply connection
Required Outlet Size1/2" outlet hose or grommet
ApplicationResidential-style RV toilet installations

What Is Included

Kit ContentsReplacement valve assembly (complete kit)
HardwareRefer to kit contents -- installation hardware may vary
InstructionsNot confirmed included; reference Lippert Flow Max service documentation for your toilet model
Important Information
  • Always shut off the RV water supply and depressurize the toilet before beginning valve replacement.
  • Confirm your toilet uses a 1/2" NPT inlet and a 1/2" outlet hose or grommet before ordering -- do not assume fitment based on toilet appearance alone.
  • This is a replacement valve kit only -- it does not include the toilet, seat, base, or any other toilet hardware.
  • Not intended for black water or waste line applications. This valve is for the fresh water flush supply side only.
  • If your toilet exhibits ongoing leak or pressure issues after valve replacement, inspect the water supply line and regulator upstream of the toilet before assuming a defective part.
  • Backed by a limited 1-year manufacturer warranty against defects. Warranty does not cover damage from improper installation or use outside the intended application.
:warning: WARNING: This product can expose you to one or more chemicals known to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov


Browse for more RV Accessories in the same category as this item:

Sanitation > RV Toilet Repair Parts
Sanitation


$11.49
$10.99
$3.89
$83.56