Home > Automotive > Tire Inflation & Pressure Monitors >

Lippert Tire Linc TPMS Sensors 2-Pack 2020106299 -- Up to 188 PSI, CR2032 Battery

Lippert 2020106299 Tire Linc TPMS Sensors 2-Pack, screw-on valve stem design, CR2032 battery powered, monitors up to 188 PSI
Lippert Tire Linc Sensors - 2 Pack
 
Alternative Views:


: $105.61
Part Number: 2020106299
Manufacturer: Lippert

Quantity in Stock :25

Free Shipping
Availability: In Stock
Qty:

 
LippertUp to 188 PSI2-PackLippert Tire Linc Sensors -- 2-Pack (Part #2020106299)

Keep your RV rolling safely with real-time tire pressure and temperature data sent straight to your smartphone. These replacement and expansion sensors for the Lippert Tire Linc TPMS system screw directly onto your existing valve stems -- no special tools, no wiring. Whether you are towing a fifth wheel, running a Class A, or managing a trailer with multiple axles, these sensors give you the visibility to catch a slow leak or sudden blowout before it becomes a roadside emergency.

Real-Time Tire Monitoring for RVs and Trailers

The Lippert Tire Linc system is one of the most capable RV-specific TPMS setups on the market, and these sensors are its front line. Paired with the Lippert Tire Linc hub and the OneControl app (iOS and Android), each sensor transmits live pressure and temperature readings multiple times per minute while your rig is in motion -- so you are not waiting for a dashboard warning light that comes too late.

When parked, the sensors drop into a low-power polling cycle and update every 15 minutes to preserve battery life without going dark. If pressure rises, drops, or spikes suddenly (as in a blowout), the app sends an immediate alert so you can pull over safely.

Screw-On Install

Thread directly onto standard Schrader valve stems. No valve core removal tools required for basic installation. Setup takes minutes per tire.

188 PSI Max

Reads up to 188 PSI, covering the full pressure range of most RV steer, drive, and trailer tires including heavy-duty load range G and H applications.

Wide Temp Range

Measures from -58 deg F to 401 deg F (-50 deg C to 205 deg C), catching both cold-weather pressure loss and dangerous heat buildup from drag brakes or under-inflation.

Replaceable Battery

Each sensor runs on a standard CR2032 coin cell battery. When the battery is low, the app alerts you. No need to replace the entire sensor.

OneControl App Integration

The Tire Linc sensors communicate through the Lippert OneControl ecosystem. Using the free OneControl app, you can set a custom PSI range for each individual tire position on your rig. The app will alert you if any tire falls outside your defined range -- useful for mixed tire loads like a fifth wheel with different front-pin and axle pressures.

System Capacity: The Tire Linc hub can monitor up to 20 tires simultaneously, making this sensor pack a practical expansion option for triple-axle trailers, tag axles, or rigs with dually rear wheels.

Repeater Technology for Signal Range

Long rigs and fifth wheels can place rear tires a significant distance from the cab or living area. The Tire Linc system uses built-in repeater technology -- sensors relay signals to each other and to the hub, effectively extending range across the length of even a 45-foot coach. Your smartphone receives fresh data regardless of where you are sitting in the rig.

Update Intervals: Sensors transmit multiple times per minute while the vehicle is moving. While parked, the update interval extends to every 15 minutes to conserve battery life.

Blowout and Rapid Deflation Alerts

The Tire Linc sensors are not just slow-leak monitors. The system is designed to detect rapid pressure loss events -- including blowouts -- and push an immediate notification through the OneControl app. At highway speeds, a few seconds of warning can make the difference between a controlled stop and a dangerous swerve.

Heads Up: This 2-pack is an add-on or replacement sensor set. A complete Tire Linc hub and a compatible OneControl gateway are required for full system operation. These sensors do not function as a standalone TPMS without the Lippert hub infrastructure already installed.

Who Should Buy This 2-Pack

  • RV owners expanding an existing Tire Linc system to cover more tire positions
  • Replacing lost, damaged, or battery-depleted sensors on a current Tire Linc install
  • Adding coverage to a newly acquired trailer or toad being integrated into an existing Lippert OneControl setup
  • Fleet and rental operators monitoring multiple units who need spare sensors on hand
Battery Tip: CR2032 batteries are widely available at hardware stores, pharmacies, and online. When replacing, use a name-brand lithium CR2032 for the best operating life in temperature extremes common to RV use.

Sensor Specifications

Part Number2020106299
Vendor Part NumberLIP2020106299
ManufacturerLippert Components
Pack Quantity2 sensors
Sensor Weight (each)0.05 lbs

Pressure and Temperature Ratings

Maximum Pressure Reading188 PSI
Temperature Range (min)-58 deg F (-50 deg C)
Temperature Range (max)401 deg F (205 deg C)

Power and Communication

Battery TypeCR2032 (replaceable coin cell)
Update Rate (moving)Multiple times per minute
Update Rate (parked)Every 15 minutes
Signal MethodRepeater-assisted RF to Tire Linc hub

System Compatibility

Compatible SystemLippert Tire Linc TPMS
App CompatibilityOneControl (iOS and Android)
Max Tires per HubUp to 20 tires
Valve Stem TypeStandard Schrader valve stems

Warranty and What's Included

WarrantyLimited 1-Year Manufacturer Warranty
Included in Box2x Tire Linc screw-on sensors
NOT IncludedTire Linc hub, OneControl gateway, CR2032 batteries
Important Information
  • These sensors require an existing Lippert Tire Linc hub and OneControl gateway to function. They are NOT a standalone TPMS kit.
  • CR2032 batteries are NOT included. Install fresh batteries before mounting sensors on valve stems.
  • Maximum pressure reading is 188 PSI -- verify this covers your specific tire's rated inflation pressure before purchasing.
  • Sensors mount on the exterior of the valve stem and may add slight stem weight. Check that your valve stems are in good condition and properly secured before installing sensors, especially on high-speed highway applications.
  • The OneControl app requires a compatible Lippert hub network. Confirm your existing Tire Linc hardware is app-connected before adding expansion sensors.
  • Operating temperature range is -58 deg F to 401 deg F. Storage and shipping outside this range will not damage sensors, but mount only to tires that will remain within spec during operation.


Browse for more RV Accessories in the same category as this item:

Automotive > Tire Inflation & Pressure Monitors
Automotive


$16.41
$6.62