Manual-lift RV roof vent with white lid, 4-speed pivoting fan head, 400 CFM airflow, and targeted directional ventilation for standard 14" x 14" roof openings.
The Maxxair 00-61000 MaxxFan Pivot is designed for RV owners who want more control over where airflow goes. Instead of moving air only straight up or straight down, the drop-down pivoting fan head can be aimed toward the living area, bed, dinette, galley, or wherever airflow is needed most.
This white-lid model fits standard 14" x 14" RV roof openings and combines manual lid operation with a 4-speed fan rated up to 400 CFM. The fan can operate with the lid open or closed, giving it added flexibility for circulation and ventilation.
Drop-down fan section pivots to direct airflow where it is needed most
Adjustable fan speeds provide up to 400 CFM of targeted ventilation
Pivot fan inward for fresh air intake or outward to exhaust stale air
Designed for standard 14" x 14" RV roof vent openings
This roof vent fan is intended for standard 14" x 14" RV roof openings and is commonly listed for roof thicknesses from 2" to 6". Always measure the roof opening and roof thickness before ordering. This model is manual lift and does not include a remote control or rain sensor.
Before Starting: Work safely on the RV roof and disconnect 12V power before wiring the fan. Use sealants and installation methods compatible with the RV roof material. Basic Installation Steps: 1. Confirm Fit: Measure the existing roof opening and roof thickness to confirm compatibility. 2. Remove Old Vent: Remove the existing vent, interior garnish, screws, and old sealant as needed. 3. Clean Roof Surface: Clean the roof mounting area so the new vent can seal properly. 4. Prepare Wiring: Confirm 12V DC power and ground wiring are available and properly fused for the fan circuit. 5. Set Fan in Opening: Position the MaxxFan Pivot over the 14" x 14" opening and check alignment before fastening. 6. Seal and Fasten: Apply compatible RV roof sealant and secure the vent according to the installation instructions. 7. Connect Power: Connect the 2-wire hookup, with black to power and white to ground unless your RV wiring instructions require otherwise. 8. Test Operation: Confirm lid movement, fan speeds, pivoting fan movement, intake/exhaust positioning, and exterior seal integrity.
Package Contents: • Maxxair 00-61000 MaxxFan Pivot roof vent fan assembly • White manual-lift lid assembly • Drop-down pivoting 4-speed fan head • Interior garnish / trim components as supplied by manufacturer • Insulated electrical connectors as supplied by manufacturer • Mounting hardware as supplied by manufacturer NOT Included — May Also Need: • RV roof sealant • Compatible FanMate vent cover • Additional wiring or connectors • Roof repair materials if the existing opening or seal area is damaged • Additional interior trim if roof thickness or finish requires adjustment Confirm roof opening size, roof thickness, power availability, and sealant requirements before beginning installation.
To confirm compatibility before ordering, have the following ready: • Existing roof opening size • Roof thickness • Current vent brand/model, if replacing an existing unit • Whether 12V DC wiring is available at the vent location • Desired lid color and fan features • Photos of the existing vent and interior garnish, if available Why this matters: RV roof vents often use a standard opening, but roof thickness, garnish fit, wiring access, and sealant condition can affect installation.
Match this roof vent fan by opening size, roof thickness, wiring availability, and desired control features. Always confirm measurements before installation.
If the fan does not operate after installation, verify 12V power, ground, polarity, fuse condition, and wiring connections before replacing parts.