White plastic replacement lifter arm end bushing for compatible Maxxair MaxxFan RV roof ventilation systems.
The Maxxair 10-20287 is a replacement lifter arm bushing used on compatible Maxxair MaxxFan roof vent systems. This small bushing helps support the lift arm connection so the vent lid can open and close smoothly.
If the original bushing is worn, cracked, missing, or damaged, the lift arm may rattle, bind, wobble, or fail to stay properly aligned. This part replaces one lifter arm bushing and is commonly listed for MaxxFan, MaxxFan Plus, MaxxFan Mini, and MaxxFan Deluxe roof vents.
Replacement bushing for compatible Maxxair roof vent lift arm assemblies
Commonly listed for MaxxFan, MaxxFan Plus, MaxxFan Mini, and MaxxFan Deluxe vents
White plastic service part designed for compatible vent lift hardware
Replaces one lifter arm bushing; original systems may use multiple bushings
This bushing is not universal for every RV roof vent. It is commonly listed for Maxxair MaxxFan, MaxxFan Plus, MaxxFan Mini, and MaxxFan Deluxe roof ventilation systems. Some original lift arm systems use three bushings, so inspect the full lift mechanism before ordering if more than one bushing is worn or missing.
Before Starting: Make sure the vent lid is supported and avoid forcing the lift mechanism if parts are worn, bent, or binding. Basic Replacement Steps: 1. Confirm Fit: Verify the Maxxair roof vent model and compare the existing bushing to the replacement part. 2. Access Lift Arm: Open the vent only as needed to access the lift arm and bushing location safely. 3. Remove Worn Bushing: Carefully remove the damaged or worn bushing from the lift arm connection point. 4. Inspect Lift Hardware: Check the lift arm, pivot points, screws, pins, and nearby bushings for wear or damage. 5. Install New Bushing: Seat the replacement bushing in the correct position on the lift arm assembly. 6. Test Movement: Open and close the vent lid to confirm smooth movement and proper alignment.
Package Contents: • Maxxair 10-20287 replacement lifter arm bushing NOT Included — May Also Need: • Additional bushings • Lift arm assembly • Manual lift operator • Vent lid / dome • Screws, pins, or other mounting hardware This listing is for one replacement bushing only. Inspect the full lift arm assembly to determine whether additional bushings or hardware are needed.
To confirm compatibility before ordering, have the following ready: • Roof vent brand and model number • Existing bushing dimensions, if measurable • Photos of the lift arm assembly and worn bushing, if available • Whether the vent is MaxxFan, MaxxFan Plus, MaxxFan Mini, or MaxxFan Deluxe Why this matters: Maxxair roof vent lift hardware can vary by vent series and operator style. Matching the model number and bushing dimensions helps avoid ordering a small part that looks close but does not fit correctly.
Match this bushing by Maxxair vent model, lift arm design, and bushing dimensions. Similar-looking bushings may not interchange across different vent mechanisms.
If replacing the bushing does not restore smooth operation, inspect the lift arm, operator mechanism, hinge, lid seal, and surrounding hardware for additional wear or damage.