Replacement 2-switch control label/keypad for select Maxxair MaxxFan roof vent fan models, including 4301K and 4401K series applications.
The Maxxair 10-43010K is a replacement 2-switch control label/keypad for select Maxxair MaxxFan roof vent fans. It is used on specific manual-opening MaxxFan models where the original control label or keypad area is worn, damaged, missing, or no longer easy to read.
This replacement part is commonly associated with MaxxFan 4301K and 4401K series roof vents, along with related 4201KW and 4251KW models. It is a small control-area repair part only and should not be confused with a complete roof vent fan, fan motor, circuit board assembly, vent lid, rain sensor, or replacement switch kit.
Replaces the worn or damaged 2-switch control label/keypad area on compatible MaxxFan models
Designed for compatible MaxxFan roof vents using a simple two-switch ceiling control setup
Commonly listed for 4301K, 4401K, 4201KW, and 4251KW model families
Control label/keypad replacement only; fan and electrical components are not included
This part is for specific MaxxFan 2-switch control applications and is not universal for all Maxxair roof vents. Before ordering, confirm your complete MaxxFan model number. This part does not replace the fan motor, lift mechanism, circuit board, rain sensor, vent lid, or complete control assembly unless your model specifically uses this keypad/label part number.
Maxxair parts listings identify 10-43010K as the replacement keypad/control label part for select 2-switch MaxxFan models. Replacement Part Number: • 10-43010K Common Alternate Format: • 1043010K Common Compatible Models: • 4301K / 4301KJ • 4401K / 4401KJ • 4201KW • 4251KW Always verify the complete model number on your existing MaxxFan before ordering.
In The Box: • One Maxxair 10-43010K replacement 2-switch control label/keypad Not Included: • Roof vent fan assembly • Vent lid or roof cover • Fan motor or fan blade • Lift arm or lift mechanism • Rain sensor • Remote control • Interior garnish or screen • FanMate vent cover hardware This is a control label/keypad replacement part only. Existing compatible fan components are reused unless they are being replaced separately.
Replacement Overview: 1. Confirm Model: Verify that your MaxxFan model uses replacement part number 10-43010K. 2. Inspect the Control Area: Check whether only the label/keypad is damaged or if the switch, wiring, or control board also needs service. 3. Disconnect Power: Turn off 12V power before working near any fan control wiring. 4. Remove Old Part: Carefully remove the worn or damaged control label/keypad from the existing control area. 5. Install Replacement: Position the new label/keypad so it aligns correctly with the existing 2-switch control layout. 6. Restore Power: Reconnect 12V power after installation is complete. 7. Test Controls: Verify proper fan operation before travel or extended use.
This replacement part is best suited for RV owners with a compatible MaxxFan roof vent where the 2-switch control label/keypad is worn, missing, damaged, or difficult to read.
Before placing your order, verify your complete MaxxFan model number and confirm that your fan uses the 10-43010K 2-switch control label/keypad. This part does not include the complete roof vent fan, fan motor, lid, lift mechanism, rain sensor, remote, screen, or full control assembly.