Smoke tinted replacement roof vent lid for select MaxxFan Deluxe RV roof vent fans, commonly used with 5100K through 8951K model roof vents.
The Maxxair 05-30520 is a smoke tinted replacement lid for select MaxxFan Deluxe RV roof vent fans. If the original lid is cracked, faded, weathered, missing, or damaged, this replacement lid helps restore exterior roof vent protection without replacing the complete fan assembly.
This replacement lid is designed for MaxxFan Deluxe applications and is commonly listed for Deluxe keypad models 5100K through 8951K, as well as select Deluxe network models. It is a lid-only repair part, so the existing hinge, lift mechanism, fan assembly, controls, screen, and mounting hardware are reused unless those items are being replaced separately.
Replaces a damaged or worn MaxxFan Deluxe roof vent lid without replacing the full fan
Tinted smoke finish helps reduce glare while matching smoke-lid Deluxe applications
Commonly used with MaxxFan Deluxe 5100K through 8951K roof vent models
Includes one replacement lid; hardware and lift components are typically reused
This lid is for select MaxxFan Deluxe roof vent fans, not all Maxxair roof vents. Before ordering, verify your fan model number rather than relying only on lid measurements. Several Maxxair lids look similar, but hinge style, lid shape, and fan series can differ between MaxxFan, MaxxFan Plus, MaxxFan Deluxe, and MaxxFan Pivot models.
The 05-30520 is the smoke replacement lid commonly listed for MaxxFan Deluxe roof vent models. Replacement Lid Part Number: • 05-30520 Common Alternate Format: • 0530520 Commonly Listed For: • MaxxFan Deluxe 5100K through 8951K models • MaxxFan Deluxe network models 8700N and 8900N • MA00-06401K style Deluxe fans Always confirm your complete MaxxFan model number before ordering.
In The Box: • One Maxxair 05-30520 smoke tinted replacement roof vent lid Not Included: • Fan motor or blade assembly • Interior screen • Roof vent base or flange • Lift motor or operator mechanism • Hinge hardware or mounting hardware • Remote, keypad, thermostat, or control parts This is a replacement lid only. Reuse your existing compatible hardware unless those parts are being replaced separately.
Replacement Overview: 1. Confirm Model: Verify that your roof vent fan is a compatible MaxxFan Deluxe model before ordering. 2. Inspect Existing Parts: Check the hinge, lift arm, operator, and mounting points for damage before replacing only the lid. 3. Remove Old Lid: Carefully detach the damaged lid from the existing hinge and lift mechanism. 4. Install New Lid: Attach the replacement lid using the original compatible hinge and lift hardware. 5. Test Movement: Open and close the vent to confirm smooth operation before travel. 6. Check Seal: Make sure the lid seats properly when closed to help protect the RV interior from weather.
This replacement lid is best suited for RV owners whose MaxxFan Deluxe fan still works properly, but whose exterior smoke tinted lid is cracked, damaged, weathered, or missing.
Before placing your order, confirm that your existing roof vent is a compatible MaxxFan Deluxe model and that you need the smoke tinted lid version. If your hinge, operator mechanism, lift arm, or fan components are also damaged, those parts may need to be replaced separately.